Sodium Naphthalene Sulfonate Formaldehyde Condensate
-
- Category :
Inorganic chemicals/Inorganic salts
- CAS NO : 36290-04-7
- EC NO :
- Molecular Formula : C21H14Na2O6S2
- Main Specifications : Net Starch fluidity(mm): 230min Surface tension(N/m):(70 ± 1) × 10 -3
- Synonyms : Dispersing Agent NNO;sodium naphthalene-2-sulfonate formaldehyde (1:1:1);disodium 5-[(7-sulfonatonaphthalen-1-yl)methyl]naphthalene-2-sulfonate;Sodium methylenedinaphthalene disulphonate;Diffusing agent NNO;Sodium polynaphthalene sulfonate;SNF Sodium Naphthalene Sulfonate Formaldehyde Concrete Agent;
Package: Packed in plastic film bag wrapped with plastic woven sack with a net weight of 25kg each
Uses : High Range Water-Reducing Admixture or superplasticizer.
Molecular Structure:
Product description:
Alternative name: sodium naphthalene formaldehyde, poly naphthalene sulfonate formaldehyde, snf powder, pns powder, FDN powder, naphthalene high range water reducer, SNF plasticizer. NSF powder,naphthalene formaldehyde, sodium naphthalene sulfonate, naphthalene sulfonate salt, superplasticiser
Appearance: Brown powder
Brief Introduction:Sodium naphthalene sulfonate formaldehyde is one of High Range Water-Reducing Admixture or superplasticizer. Superplasticizers or high range water reducers or dispersants are chemical admixtures that can be added to concrete mixtures to improve workability.
High Range Superplasticizers have generally been manufactured from sulfonated naphthalene condensate or sulfonated melamine formaldehyde.
Main Performance:Sodium Naphthalene Formaldehyde produces concrete with extremely workable characteristics referred to as high slump. Sodium naphthalene formaldehyde also allows concrete to be produced with very low water/cement ratios at low or normal slumps. Sodium Naphthalene Formaldehydeis ideal for use in prestress, precast, bridge deck or any other concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidationSodium Naphthalene Formaldehyde can be added directly or added in after dissolved. It can be added during mixing and after-mixing. The afterward approach can achieve better result. The suggested addition rate is 0.75%.
Sodium Naphthalene Formaldehyde Direction: Direct use of powdery agent is allowed. Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%). The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds.
Sodium Naphthalene Formaldehyde Packing: Packed in plastic film bag wrapped with plastic woven sack with a net weight of 25kg eachStorage: Kept in dry and ventilating place, prevent from rain and moisture when storage; if agglomerated, please crush and make it into solution, and its effect will be the same.