ChemNet > Gold Suppliers > Lambert Holding >

Sodium Lignosulphonate

Sodium Lignosulphonate

Category :

Other Chemicals

CAS NO : 8061-51-6
EC NO :
Molecular Formula : C20H24Na2O10S2
Main Specifications :
Synonyms : Ligninesulfonic acid sodium salt;Sodium Lignosulphonate;Sodium lignosulfonate;Sodium lignosulfonate;Sodium Lingosulfonate;
Sodium Lignosulphonate
Molecular Structure:Sodium Lignosulphonate 8061-51-6
Product description:
Sodium Lignosulphonate
CAS NO.:8061-51-6

products introduction:

Sodium Lignosulphonate ( lignosulfonate ) water reducer are mainly for concrete mixture as water-reducing additive. Low dosage , low air content , water reducing rate is high ,adapt to most kind of cement. Can confected as concrete early-age strength enhancer , concrete retarder , antifreeze , pumping aids etc. Nearly no precipitate product in the liquor additive which is made from The sodium lignosulphonate and Naphthalin-Group High-Efficiency Water Reducer .The sodium Lignosulphonate is fit for apply to building project, dam project, thruway project etc.

Technique parameter:

Specification
Appearance: Yellow(light brown) powder
Water-reducing rate: 8-12 %
Moisture: Max 7.0 %
Secrete water lead than: Max 75 %
PH value: 9 to 11
Calcium magnesium content: Max 1.0 %
Reducing sugar content: Max 4 %
Air content: Max 4 %
Water-insoluble substance: Max 1.5 %
Inorganic salts(NaSO4): Max 5.0 %
     
Main performance
1,Can reduce 10% of water consumption at least ;
2, can improve mixture of the concrete;
3, Compression strength improves by more than 15% equally on 3-28 days;
4, Can reduce the initial stage of the cement heat of hydration by a large margin;
5, Have no function of corroding on the reinforcing bar.

Using methods :


1. 0.2-0.5% of mixing amount in concrete (with cement weight), users can adjust the mixing amount through the test ;
2. Can use after mixed liquid , also can put with cement , aggregate into mixer to use at the same time too, need lengthen time properly;
3. the result is more obvious after mixing with high-efficient naphthalene department water-reducing agent. User can determine the suitable dosage according to the result that cement variety, aggregate situation, naphthalene department type of water-reducing agent are tested fixing;

Notice :

1. Strict control to avoid excessive dosage;
2. When the temperature lowers under 5DEG.C,common concrete projects are not
suitable using the chemical additive independently.
3. Experiment to make sure the dosage before use.

Packing & storage & transportation :

1.packing :It has lastic pellicle inside and is exteriorly packed with plastic woven bag with 25kg net weight per bag.
2.Storage :It shall be stored in a waterproof, rainproof place to avoid agglomeration. If there is agglomeration,smashing it or dissolving it will not affect using effect.The product is harmless and does not deteriorate in long term. It's not a flammable and explosive substance.
3. Transportation : It's suitable for both truck transportation and railay transportaion without any limit of remnant cargo or full truck.

Send your inquiry to Sodium Lignosulphonate supplier

Enter between 20 to 3,000 characters,English only.

Contact us
Company:
   Qingdao Lambert Holdings Co., Ltd.
Contact:
   Mr. Martin Liu
Phone:
+86-532-80986408,80987221
Mobile phone:
Fax:
+86-532-80987252
E-mail:
Contact Supplier
Website:
http://www.lambertchina.com
Address:
A1102,Zhuoting Plaza,No.666,Jiangshan Rd.,Qingdao Development Zone,China
Zip Code:
266555
World Wide ChemNet: - International - China - Korea
About Us - Top Products- Partner with Us - Contact Us - Help - Sitemap
ChemNet is a registered trademark of Zhejiang NetSun Co., Ltd.