Adhesives and Sealants/Fiber and Garment Adhesives

Organic Silicon Resin(SH-9602) 1. Main CompositionMethylpolysilicone resin2. Technical IndexItemIndexPerformanceLight yellow or red brown liquid, opalescence is permitted, no mechanical impuritySolid Content (150℃,2h,%) 50±1Viscosity (25℃,S) No less than15Drying Time (200℃,Copper Sheet, h) No more than2Mass Loss(400℃,3h,%) No more than5Electrical Breakdown Strength (KV/mm, no less than)Normal (20±5℃)65High temperature (200±2℃)30Become Damp (20±5℃, Relative Humidity 95±3% after 24 h)40Volume Resistance (Ω?cm, no less than)Normal (20±5℃)1014High temperature (200±2℃)1011Become Damp (20±5℃, Relative Humidity 95±3% after 24 h)10123. Performance and UseThe product has fine Heat Resistance, flexibility, insulation moisture proof properties. It is appropriate for the use as H level motor, electrical appliance, transformer coil and transistor seal and high temperature resistant paint.4. Packing, Storage & TransportationThe product should be packed in dry and clean 200kg iron drum and seal-packing , and stored at room temperature between 10~35℃, away from direct sunlight and heat. The product should be transported according to inflammable material.

SH-024 Acrylic Acid Modified Organic Silicon Resin 1. Performance and UseThe product is made through special process by special acrylic acid and silanol hydrolyzed by phenyl and methyl. The product both has the advantages of acrylic acid resin and organic silicon resin, for example, superior heat proof property, weather resistance property and strong adhesive force. It could be used for the making of high temperature resistant paint, weather resistant paint and H level organic silicon insulation paint.

2. Main technical indexItemIndexExperimentMethodPerformanceLight yellow or red brown liquid, opalescence is permitted, no mechanical impurityGB1721Viscosity (25℃,S)15~40GB1723Solid Content (150℃,2h, ),% 50±1GB1725Drying Time (200℃,h)≯1.5GB1728Heat Resistance (250℃,200h)Non foaming, no crackGB17353. Packing, Storage & Transportation The product should be packed in 200kg iron drum and placed in cool and dry place, without direct sunlight, and should be away from acid and alkali. The product should be transported as dangerous material.