Furan resin Suppliers, Furan resin Manufacturers.
Self-hardening furan resin
Packing and storage
metal pail or plastic bucket in sealed condition, net weight 230Kg or 1t.. Should be stored in a cool & dry place, away from heat and direct sunlight; resin can not be directly mixed with acidic substances such as curing agent, otherwise it will cause severe reactions.
Spec / Model
|
Index trademark |
Density (20 ℃) g / cm | Viscosity (20 ℃) mpa.s ≤ | Free formaldehyde% ≤ | Nitrogen % ≤ | Shelf life (years) | Scope of application |
| MF-845 | 1.15-1.25 | 50 | 0.5 | 7 | 1 | Cast iron and non-ferrous castings |
| MF-850 | 1.12-1.20 | 40 | 0.3 | 6 | 1 | Various cast iron parts |
| MF-860 | 1.12-1.20 | 40 | 0.3 | 5 | 1 | Various cast iron parts |
| MF-864 | 1.12-1.18 | 40 | 0.3 | 4 | 1 | Ductile cast iron parts, cast iron parts of production line |
| MF-863 | 1.10-1.20 | 30 | 0.3 | 3 | 1 | Ductile Iron Castings |
| MF-902 | 1.10-1.18 | 30 | 0.3 | 1 .. 5 | 1 | Large cast iron parts, steel castings |
| MF-105 | 1.12-1.18 | 30 | 0.3 | 0.5 | 1 | Large Steel Castings Alloy Steel Castings |
Note: according to customer requirements, we can develop and produce specific products.
Sulfonic acid curing agent A, B curing agent of Self-hardening furan resin
Packing and storage
1. Stored in a cool, dry and ventilated room, an open flame is prohibited.
2. Do not strike during handling, transportation and storage; attention to packaging intact, sealed tightly; no mixed with curing agent directly; avoid explosion.
3. it is one kind of strong acidity, wear Labor insurance supplies when used to prevent burns body; if accidental direct contact with the body, wash with water immediately and continuously, if necessary, seek medical treatment immediately.
| Index trademark | Density (20 ℃) g / cm | Viscosity (20 ℃) mpa.s ≤ | Acidity in sulfuric acid (%) | Free sulfuric acid% | Applicable range of sand temperature ℃ |
| MG-02 | 1.1-1.3 | 30 | 18-23 | 7-10 | 35-40 |
| MG-03 | 1.1-1.3 | 30 | 25-27 - | 10-13 | 25-30 |
| MG-03A | 1.1-1.3 | 30 | 28-32 | 10-13 | 15-20 |
| MG-09 | 1.2-1.3 | 50 | 34-36 | 15-17 | 5-10 |
| MG-09A | 1.2-1.4 | 60 | 40 | 16-19 | About 0 ℃ |
| MG-A | 1.2-1.45 | 35 | for AB hardener intelligent control controller only. | ||
| MG-B | 09-1.1 | 15 | |||
Thermoplastic self-hardening furan resin
Packing and storage
Packaging is similar to general self-hardening furan resin; but it should be kept in a ventilated room, avoid water, fire, heat and direct sunlight, period is 6 months if meet the above conditions of storage .
Spec/Model
1．resin
| Index trademark | Appearance | Density (20℃) g/cm | Viscosity (20℃) mpa.s≤ |
| ＭＦ－ＲＳ０１ | tan liquid | １.１０－１.２０ | ５０ |
| ＭＦ－ＲＳ０２ | tan liquid | １.１０－１.２０ | ５０ |
2． Curing agent (supporting)
| Index trademark | Appearance | Density (20 ℃) g / cm | Viscosity (20 ℃) mpa.s ≤ | Acidity | Applicable Weather |
| MG-1 | Brown liquid | 1.05-1.16 | 20 | 20-25 | Summer |
| MG-2 | 1.16-1.20 | 50 | 26-32 | Spring and autumn | |
| MG-3 | 1.20-1.35 | 70 | 33-37 | Winter |
A new generation of self-hardening alkaline phenolic resin
Packing and storage
1. Resin or curing agent is packed in metal pail. Note: this curing agent is combustible, , do not mix with alkaline phenolic resin during the period of in the handling and storage , away from fire and heat.
2. resins should be stored at room temperature ≤ 25 ℃ and ventilated place, because its Viscosity increases with the increase of temperature and storage time.
3. during operation, wear Labor insurance supplies when used to prevent burns body; if accidental direct contact with the body, wash with water immediately and continuously, if necessary, seek medical treatment immediately.
Spec/Model
1． Alkaline phenolic resin
| Index trademark | Density (20 ℃) g / cm | Viscosity (20 ℃) mpa.s ≤ | Free formaldehyde ≤% | PH value ≥ | Shelf life (≤ 25 ℃) |
| MJ-01 | 1.25 | 170 | 0.1 | 12 | 3 months |
| MJ-02 | 1.25 | 100 | 0.1 | 12 | 3 months |
2. organic ester curing agent
| Model Index | MZG1 | MZG3 | MZG5 | MZG7 |
| Density (20 ℃) g / cm | 1.05-1.20 | |||
| Viscosity (20 ℃) mpa.s | ≤ 30 | |||
| Acidity ≤% | 0.2 | |||
| Sand temperature for application ℃ | 30-35 | 15-25 | 0-10 | -10-0 |
| Curing speed |
Slow  Fast |
|||
YJ-2 furan resin
Main Technical Index
1． Furfuryl alcohol resin
| Acetone insoluble% | Moisture% | Viscosity (20 ℃) mpa.s | Density (20 ℃) g/cm3 |
| ≤ 0.5 | ≤ 0.5 | ≥ 100 | ≥ 1.22 |
Uses: Furfuryl alcohol resin owns high bond strength, so it can be used for modified epoxy resin to improve its heat resistance, widely used in anti-corrosion engineering.
2．YJ furan liquid
| Appearance | Viscosity (20℃) Tu-4 cup | Density (20℃) g/cm3 |
| tan liquid | 20—30 seconds | ≥1.18 |
Uses: mainly used for the production of FRP powder and furan resin daub.
Company： |
Zibo Mingxin Chemical Co., Ltd. |
Contact： |
Vane Liu |
Phone： |
+86-533-2081899 |
Mobile phone： |
|
Fax： |
+86-533-2081249 |
E-mail： |
 Contact Supplier |
Website：
|
http://www.mxchem.cn |
Address： |
Fengshui Town, Zhangdian District, Zibo City, Shandong Province, China |
Zip Code： |
Search Product