Uses : This product is widely applied in PP, PVC , PET, HDPC ,ABS and PS etc. in the way of gravure printing, therefore it is the good substitute of traditional benzene- soluble compound ink.

Product description:

1. composition and property:

This product is precisely made from water-base resin and filling, compound accessorial material and water, it is environment friendly product. There is nothing of organic solvent. It has no property of toxic, irritation and corrosive, it's not easy to catch fire and explode.

This product is of good stabilization, good printability, high adhesion, moderate drying and with super waterproof and grind resistence. It is especially applied in the fields which are strictly required by good condition of sanitation, such as in food, beverage, medicament, etc.

2. technical specifications:

bittiness:≤15µm

viscosity: 30±15 sec.( painting 4# cup, 25°C )

pigment degree :95~110%

initial drying : 10~20mm

adhesion:≥85%

surface tension:≥38 X 10-5 (N/CM2)attentions:

a)This product should be stored at 5~30°C entironment, its shelf life is one year. Too low or high temperature is forbidden so as not to be frozen or solarized.b)Sufficiently mixed round before using, suggest to use cycle pump while printing.c)Please dilute this product with 5~20% water or with ethanol while using.Please wash the printing roller with clean water right away in case it is need to stop the running machine when using this product so as not to affect printing after restarting.