PPDI Suppliers, PPDI Manufacturers.
We are offering the PPDI-based prepolymers and thermoplastic elastomer chips. PPDI (p-polyphenylene diisocyanate) is a structurally symmetric aromatic diisocyanate and is mainly used to produce polyurethane elastomeric products with a tighter hard segment and high-performance properties that conventional polyurethane products could not match. Besides the standard products listed below, we also provide the polyurethane products with specific properties requested by the customers.
PPDI-terminated Prepolymers (with low free PPDI)
Prepolymer |
TP1053 |
TP2052 |
TP2055 |
TP1176P |
NCO% |
3.65-3.90 |
2.40-2.70 |
5.45-5.75 |
6.35-6.65 |
Viscosity ( |
500 |
120 |
300 |
350 |
Color |
White |
White/Off White |
White/Off White |
White |
Appearance R.T. |
Semi-solid |
Semi-solid |
Semi-solid |
Semi-solid |
PPDI-based thermoplastic polyurethanes are offered as pellets, are readily injection moldable and can
l Perform well where other polyurethane materials fail at the elevated temperatures
l Have high wear-resistance for extended seal life and excellent resistance to compression set
TPU Product |
TU-1050A |
TU2050A |
TU4050 |
Specific Gravity |
1.20 |
1.22 |
1.18 |
Hardness(Shore A) |
92 |
95 |
85 |
Bayshore Resilience |
60-63% |
60% |
60% |
Ultimate Tensile Strength (psi) |
8300 |
8480 |
7590 |
100% Modulus (psi) |
1740 |
1760 |
1118 |
300% Modulus (psi) |
2900 |
3060 |
2175 |
Elongation @ Break (%) |
650 |
700 |
850 |
Compression Set (70 h @ 212° F) |
34-37% |
36-39% |
40-43 % |
Operating Temp. Range (°F) |
- 54 to 285 |
-65 to 275 |
-65 to 275 |
Drying and Injection Molding Conditions:
1. Drying conditions: 80-95 °C in a forced air oven for 4-6 hours
2. Setting for Injection Molding
|
Tip/°C |
Middle/°C |
Front/°C |
Range Suggested Setting |
200 – 220 210 |
200 – 218 205 |
200 – 218 200 |
Company: |
Upchem(China) Co., Ltd. |
Contact: |
|
Phone: |
+86-578-2990666 |
Mobile phone: |
|
Fax: |
+86-578-217605 |
E-mail: |
3-sales@upchem.com |
Website:
|
http://www.upchem.com |
Address: |
Lugu Ave.339#, Lishui economic development zone,Lishui City, Zhejiang, China |
Zip Code: |
323000 |