Details for PU Footwear Mould Release Agent
PU Footwear Mould Release Agent
111Category: Adhesives and Sealants/Silicone Sealants
CAS NO: EC NO: Molecular Formula: Molecular Weight: Specification: Product description:
Product Name: PU Footwear Mould Release Agent Item No.: SilibaseMD-4309 Physical Data of SilibaseMD-4309 PU Footwear Mould Release Agent: ● Appearance：Milky white liquid ● PH Value ：Neutral ● force：N/100cm²≤40 ● Working temperature ：40~80℃ ● Dilution ratio (by weight) ：1:20 for polyether and 1:25 for polyester ● Density： 0.98-1.01 g/ml ● Solid content ：30-33% Characteristics of SilibaseMD-4309 PU Footwear Mould Release Agent: ● Reduce build-up on mold surface and control transfer to the molded products. ● Lower scrap rates in molding operations to increase productivity. ● Help to achieve post-processing (adhesion, gloss varnish, paint etc.) Usage of SilibaseMD-4309 PU Footwear Mould Release Agent: ● Spray 3-5 layers for new mold or cleaned mold evenly with the release agent fully covered in mold. ● You can use an air gun to blow-dry the release agent and finally use a clean cotton cloth to wipe the mold. Release agent must be thorough dry before PU injection. ● Every time after releasing the entire mold evenly coated with a fresh layer of mold release agents, in order to ensure good release effect. ● Before doing post-processing, requiring wash by detergent or solvent after demoulding.
if you are sourcing PU Footwear Mould Release Agent from China ,just feel free to inquire
Search Product