1. Brief Introduction
CM503 solid flow modifier is a masterbatch containing CM501 with epoxy resin as a carrier which can be used in powder coatings to reduce of eliminate coating surface defects such as craters, fisheyes, pinholes and orange peel as well as to also promote flow and leveling properties. This product will be supplied in the form of a granular resinous material with 15% (wt) active contents.
2. Specifications
Appearance | Pale yellow granular Resinous material |
Soild contents（%） | ≥ 99 |
Soften point (℃) | 85-100 |
EPV (eq/100g） | 0.07-0.11 |
3. Useage Ranges
Beside of epoxy and hybrid systems, CM503 is inappropriate for all of clear powder coatings or Pigmented PES/TGIC. PES/primid and PU etc, no recommended also in other liquid coatings.
4. Useage Levels
Typically used at 5-7% based on the total weights of powder coating.
5. Package and Storage
Packing in with PE lined multi paper bags. Net weight 25 kg per bag.
Store in cool and dry place to avoid caking. Keep away from heat resource.
Search Product