General Description
MFF Series Pleated Filter Cartridges are manufactured to exact standards and are used in the most demanding industrial environments. Manufactured in a range of length option and micron ratings. Media has a fixed pore construction of high quality fibres.

The combonation of surface and depth filtration provides a long lifetime. Due to use of the premium quality filter fabrics, the pleated filter cartridges have superior flow characteristics with very low pressure drop compared to depth media of similar micron rating. Due to large filter area and design, allow the use of a reduced number of cartridges. Your advantage is a smaller filter vessel, less footprint and lower capital investments. The pleated cartridges have a very large filtration area and therefore a very high dirtholding capacity. Long cartridge lifetime means lower operational condumable costs, less working changing the cartridges and less waste.

Features
Large filter area and depth filtration provides a long lifetime of pleated filter cartridge.
Low cost because of large filter area and reduces labor costs to change.

Specifications
Filter Media: PP, PET, Glass Fiber
End Cap Material: PP, ABS
Center Core: PP, ABS
Netting: PE
Seal Material: Silicone, EPDM, NBR, Viton
End Cap Types: DOE, -226/Flat End
Length: 10 " , 20 " , 30 " , 40 "
Outside Diameter: 69mm
Inside Diameter: 28mm
Removal Ratings: 1µm, 2µm, 5µm, 10µm, 20µm, 50µm

Operating Pressure and temperature:
The pleated cartridge construction will withstand differential
Pressure up to 60psi(4bar) at ambient temperature.
The optimum change out differential pressure is 35psi (2.5bar) up to 52 ℃ .
Service condition:
500kPa(5bar) by 20 ℃
300kPa(3bar) by 65 ℃

Applications
Chemical
Oil & Gas Industry
Metal Treatment
Process Water
Electronics
Coatings, Paint
Petroleum

Part Numbers/Ordering Information
DLMF*#=+x(e.g.,DLMFF40PP5EI= 40"PP, 5µm, Seal Material: Silicone, -226/Flat End )