Newera Chemical (Shandong) Co., Ltd.

NFS9400 HIGH RESILIENCE SERIES

• Category :

  Organic chemicals and Derivatives

• CAS NO :

• EC NO :

• Molecular Formula :

• Molecular Weight :

• Main Specifications :

• Product description :

  FEATURES:

  Good Resilience

  Good mechanical properties

  Excellent solvent, oil, fuel resistance

  Maintains properties over a wide temperature range

  TYPICAL PHYSICAL PROPERTIES

  Properties	Test Method	NFS9430	NFS9440	NFS9460	NFS9470U
  Specific Gravity, g/cm3	ASTM D792	1.38	1.40	1.46	1.47
  Hardness, Shore A	ASTM D2240	28	40	60	70
  Tensile Strength, Mpa	ASTM D412	8.0	8.0	8.5	8.2
  Tear Strength, kN/m	ASTM D624-B	15	14	16	15
  Elongation at Break, %	ASTM D412	550	400	300	300
  Compression Set(177℃x22h), %	ASTM D395	9	10	10	11
  Resilience, % Rebound	ASTM D2632	33	40	38	37
  Volume change, % Fuel B @25℃×72h	ASTM D471	25	24	22	21

  *Appearance:Pale yellow, neat, no obvious mechanical admixture.

  *Above values only represent typical values, products with various features can be supplied according to customer requirements.

  〖PROCESSING ADVICE〗

  Various organic peroxides will vulcanize these fluorosilicone compounds. Fabricators should make their own selection of curing agents on the basis of methods of manufacturing, desired properties, and safety considerations. Curing agent can be mixed into the compounds. The optimum curing procedures will depend on the process methods you use and the physical dimensions of the vulcanized product. It is usually necessary to post cure the products in air oven after molded cure.

  〖Usage〗

  Adding 0.6~0.8 phr curing agent (DBPH recommended)

  Press cure: 170℃×15 mins; Post cure: 200℃×4 hrs

  If customers require other curing temperature, curing system must be changed.

  〖Package〗

  Packed in plastic bags placed into reinforced cartons, 20kg/2bags/carton.

  Shelf-life is 12 months when kept in dry and ventilated environment.

  〖Notes〗

  1. This product has cold-flow characteristics, should avoid bag breakage in the process of transportation and usage.

  2. The product should be kept neutral, avoid contact with acid or alkaline substances.