Jiande City Silibase Silicone New Material Manufacturer Co., Ltd

PU Foam Stabilizer SilibasePU-9193

• Category :

  Other Chemicals/Others

• CAS NO :

• EC NO :

• Molecular Formula :

• Molecular Weight :

• Main Specifications :

• Product description :

  Item No.: SilibasePU-9193 Product Name：PU Foam Stabilizer Product Introduction SilibasePU-9193 is a non-hydrolyzable polysiloxane polyether copolymer that has been developed especially for rigid & microcellular polyurethane foam applications. Key Features and Benefits SilibasePU-9193 is a general purpose surfactant for rigid foam application such as panel, solar heater, spray. Typical use level is 2.0 to 3.0 parts per hundred of polyol (php). SilibasePU-9193 is highly recommended to be used in the rigid applications which require high compressive strength, excellent fire retardant performance SilibasePU-9193 can be also used as surfactant for microcellular applications such require high compressive strength, excellent fire retardant performance. Typical Physical Properties Parameter Specification Appearane Clear liquid Density @ 25 ℃ 1.03 g/cm3 Viscosity @ 25 ℃ 200-400 cst Moisture% ≤0.3 Flash Point（Pensky-Martens Closed Cup） 93℃ Storage and Handling Procedure Product SilibasePU-9193 should, if possible, be stored at temperature between 15 to 35 °C. Under these conditions and unopened drums, has a shelf-life of 12 months from the date of manufacture. Information Concerning Classification and labelling according to transport regulations and chemical laws Protective measures for storage and handling Measures in case of accidents and fires Toxicity and ecological effects Can be found in our Material Safety Data Sheets Packaging 200 kg iron drums Statement The legal sense is intended or implied. We reserve the right to make any changes according to technological progress or further development. Each user bears full responsibility for making its own determination as to the suitability of product, recommendation, or advice, for its own particular use. Each user must identify and perform all tests and analysesnecessary to assure that its finished parts incorporating products will be safe and suitable for use under end-use conditions.