Jiande City Silibase Silicone New Material Manufacturer Co., Ltd

Rubber Mould Release Agent

• Category :

  Catalyst and Auxiliary

• CAS NO :

• EC NO :

• Molecular Formula :

• Molecular Weight :

• Main Specifications :

• Product description :

  Product Name: Rubber Mould Release Agent Item No.: SilibaseRA-4ITT Summary: SilibaseRA-4ITT Rubber Mould Release Agent is semi-permanent and water-based emulsion for inner tires demoulding. SilibaseRA-4ITT Rubber Mould Release Agent is designed for butyl rubber bladder of tire vulcanization. When properly applied to the inside of the green tire, this formula provides excellent air bleed and lubrication between the mold and the green tire resulting in good tire uniformity and minimal trapped air defects. Specific Norms: ● Appearance：Milky white liquid ● Density(g/ml)：0.98-1.01 g/ml ● PH value：7.0-7.2 ● Working temperature：70~150℃ ● Dilution ratio：1:3-5 mix water by weight ● Solids, (% Nv)：35% Usage Instruction: ● Clean the mold with proper detergent and use non-polluting green tire to avoid the bad combination of coating. ● Dilute SilibaseRA-4ITT Rubber Mould Release Agent with purified water and ensure accurate dilution ratio after practical testing and add release agent into the tank of spray system after dilution. Spray uniformly release agent on the green tire and must cover the green tire fully. Storage & Shelf life: ● Please stored at indoor under 5℃-35℃ and away from acids and alkaline. Seal up container after open to use and need to use up diluted release agent within 3 days. ● Shelf life is 18 months at least from the date of manufacture. Packaging: 25kgs/barrel, 200kgs/drum in closed containers.