Wuhan Jadechem Chemicals Co.,Ltd

TL-J181 Waterborne dispersants

• Category :

  Catalyst and Auxiliary/Surface Active Agent

• CAS NO :

• EC NO :

• Molecular Formula :

• Molecular Weight :

• Main Specifications :

  Waterborne dispersants for inorganic pigment and filler

• Packing :

  25kg plastic drum; 200kg iron drum

• Product description :

  Waterborne dispersants for inorganic pigment and filler

  OX DISPER TL—J181

  DESCRIPTION

  OX TL-J181 is an anionic polymeric dispersing agent for aqueous coating systems, printing inks, electronic ink jet and plastic industries. It is standard additive for binder-free pigment concentrates. For its strong viscosity reduction, stable storage and gloss improvement properties, it is suitable for titanium dioxide and filler slurry . It can increase solid content especially for printing paste.

  PRODUCT DATA SHEET

  Model Physical form Composition Solid content TL -J181 Colorless to yellowish liquid Polymer block phosphate 60% TL-J183 Colorless to yellowish liquid Polymer block phosphate 60%

  STORAGE AND TRANSPORTATION

  Separation or turbidity may occur during storage or transportation below 0 ℃. Heat to 20 ℃and stir.

  APPLICATION GUIDELINES

  Water-based ink, paint, water-based universal color paste

  SPECIAL FEATURES AND BENEFITS

  The additive deflocculates pigments by means of steric stabilization and the double stabilization of the charge. As a result of the small particle sizes of the deflocculated pigments, high levels of gloss can be achieved and the color strength is improved. The transparency is also increased and the viscosity is reduced. In this way, the flow characteristics are also improved and higher pigment loading is possible. Especially for titanium dioxide, its solid content can be 70% while flowing like water.

  APPLICATIONS

  Industrial coatings ● Leather finishes ● Emulsion paints ● Plastic masterbatch ● Water-based ink ○ ●—— especially recommended；○—— recommended The additive is recommended for producing stable universal pigment concentrates.

  RECOMMENDED ADDITION LEVEL

  Amount of additive (as supplied) based upon pigment： Inorganic pigments: 2%—5% The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.

  PROCESSING INSTRUCTIONS

  Grinding should only take place in water and grinding resin. Mix the additive with water and only add the pigments once the additive has been homogeneously and uniformly distributed.

  PACKING

  —25kg plastic drum —200kg iron drum

• Uses :

  Industrial coatings; Leather finishes; Emulsion paints; Plastic masterbatch; Water-based ink