Qingdao Green Chemicals Co., Ltd.

MFF Series Pleated Filter Cartridge

• Category :

  Inorganic chemicals

• CAS NO :

• EC NO :

• Molecular Formula :

• Molecular Weight :

• Main Specifications :

• Product description :

  General Description
  MFF Series Pleated Filter Cartridges are manufactured to exact standards and are used in the most demanding industrial environments. Manufactured in a range of length option and micron ratings. Media has a fixed pore construction of high quality fibres.
  
  The combonation of surface and depth filtration provides a long lifetime. Due to use of the premium quality filter fabrics, the pleated filter cartridges have superior flow characteristics with very low pressure drop compared to depth media of similar micron rating. Due to large filter area and design, allow the use of a reduced number of cartridges. Your advantage is a smaller filter vessel, less footprint and lower capital investments. The pleated cartridges have a very large filtration area and therefore a very high dirtholding capacity. Long cartridge lifetime means lower operational condumable costs, less working changing the cartridges and less waste.
  
  Features
  Large filter area and depth filtration provides a long lifetime of pleated filter cartridge.
  Low cost because of large filter area and reduces labor costs to change.
  
  Specifications
  Filter Media: PP, PET, Glass Fiber
  End Cap Material: PP, ABS
  Center Core: PP, ABS
  Netting: PE
  Seal Material: Silicone, EPDM, NBR, Viton
  End Cap Types: DOE, -226/Flat End
  Length: 10 " , 20 " , 30 " , 40 "
  Outside Diameter: 69mm
  Inside Diameter: 28mm
  Removal Ratings: 1µm, 2µm, 5µm, 10µm, 20µm, 50µm
  
  Operating Pressure and temperature:
  The pleated cartridge construction will withstand differential
  Pressure up to 60psi(4bar) at ambient temperature.
  The optimum change out differential pressure is 35psi (2.5bar) up to 52 ℃ .
  Service condition:
  500kPa(5bar) by 20 ℃
  300kPa(3bar) by 65 ℃
  
  Applications
  Chemical
  Oil & Gas Industry
  Metal Treatment
  Process Water
  Electronics
  Coatings, Paint
  Petroleum
  
  Part Numbers/Ordering Information
  DLMF*#=+x(e.g.,DLMFF40PP5EI= 40"PP, 5µm, Seal Material: Silicone, -226/Flat End )

  Code=Rating	Code*Length	Code # FilterMedia	Code+ Seal Material	Code x End Cap Types
  1 1µm	10	PP PP	E EPDM	I DOE
  2 2µm	20	GF Glassfiber	S Silicone	II -226/Flat End
  5 5µm	30	PET Polyester	V Viton
  10 10µm	40		B NBR
  20 20µm
  50 50µm