SWD POLYURETHANE (SHANGHAI) CO., LTD

industry cooling system special low temperature anticorrosion coating

• Category :

  Paint and Coatings

• CAS NO :

• EC NO :

• Molecular Formula :

• Molecular Weight :

• Main Specifications :

• Packing :

  25kg/barrel

• Product description :

    SWD959 Series SH128 One component moisture

      cure polyurethane (rigid) system industry low

         temperature cooling system anticorrosion coating

  Descriptions                 The cooling system of the equipment of the industry works in super-low temperatures for a long time. Traditional anticorrosion coating products are hard to achieve the ideal protective effect since it’s easy to crack and peel up under this environment. Once the corrosion is excessive, the maintenance will be very different and cause great damage for the normal production. The low temperature anticorrosion special coating developed by SWD Urethane Co., USA overcomes the disadvantages that no able to keep the high anticorrosion and low temperatures flexibility properties together of traditional common coating. It will provide effective protection for the equipment and expand its life.

                                                                                  

  Characteristics              One component polyurea polyurethane resin in the coating not only cured by absorption and reaction with air moisture, but also can combine with substrate hydroxyl group, then greatly increases the coating's adhesive strength on surface of substrate to ensure that it won’t fall off until the low temperatures of -60 ℃. The urea bond, urethane bond and hydrogen bond between high molecules chain structure give the film of coating excellent performances of acid resistance, alkali resistance, salt resistance, oil resistance, ammonia resistance, water resistance, chemical media resistance and the super flexibility and low temperature resistance.

                                                                                  

  Specifications

  Adhesive strength                            11.5Mpa

  Impact resistance                             ≥50kg•cm

  Tensile strength                              17Mpa

  Elongation                                   350%

  Temperature variation                         -60℃

  Wear resistance（700g/500r）                  10.5mg

  Acid resistance 40%H₂SO₄ or 20%HCI, 30d         no rust no bubbles no peel

  Alkali resistance 50%NaOH, 30d                 no rust no bubbles no peel

  Salt resistance 100g/L, 30d                       no rust no bubbles no peel

  Salt spray resistance 1000h                      no rust no bubbles no peel

  Oil resistance 0# diesel Crude oil 30d              no rust no bubbles no peel

                                                                                  Data of performance

  Color                        Multiple colors as customers’ need

  Luster                        half glazed

  Density                       1.03g/cm³

  Volume solid content            78%±2%

  VOC                           ≤176g/L

  Recommended dry film thickness   150-250μm(system)

  Theoretical coverage             0.19kg/sqm (calculated by the above solids percentage and dry film thickness of 150 microns)

  Practical coverage                Allow appropriate loss factors

  Dry time                       1-3h

  Overcoating interval              min: 3h, max: 26h

  Overcoating method              Airless spray, Air spray, Brush, Roller

  Flash point                      52℃

                                                                                    

  Recommend procedures

   

  No.	Name of products	Layers	Dry film thickness（μm）
  1	SWD one component iron oxide red anticorrosion primer	1	50
  2	SWD industry cooling system low temperature anticorrosion coating	1	80
  3	SWD industry cooling system low temperature anticorrosion coating	1	70
  Total		3	200

            Note: painting 2 or 3 times is allowed

                                                                                  

  Application scopes         Industry cooling system equipment anticorrosion.

                                                                                   

  Shelf life                 12 months (Indoor with dry and cool conditions)

                                                                                   

  Packing                    20kg/bucket. 25kg/bucket

                                                                                   

  Production area             Minhang District, City of Shanghai（19% of raw materials imported from SWD US）

                                                                                   

  Security                   To apply this product must be accordance with the relevant national regulation of sanitation, safety and environment. Avoid contacting the wet coating.

                                                                                   

  Global applicability         Our company aims to provide worldwide customers the same coatings, but sometimes, some small adjustments are made to satisfy each region conditions and international norms, in this case, an alternative product data will be provided.

                                                                                      

   Integrity declaration         Our company guarantees the reality of the listed data, due to the diversity and variability of the application environment, please test and verify it before use. We don’t take any other responsibilities except the coating quality self and reserve the right of modification the listed data without prior notice.

        

• Uses :

  Industry cooling system equipment anticorrosion.