SWD POLYURETHANE (SHANGHAI) CO., LTD

industry storage tank, tower equipment internal wall special anticorrosion coating

• Category :

  Paint and Coatings

• CAS NO :

• EC NO :

• Molecular Formula :

• Molecular Weight :

• Main Specifications :

• Product description :

   SWD959 Series SH126 One component moisture cure

     polyurethane (rigid) system industry storage tank/tower equipment internal wall special anticorrosion coating

  Descriptions                 Tanks and towers are main equipment in the industrial plant, in general, they need long-term anticorrosion life. The internal wall is very easy to be corrosion damaged since it stays in a variety of chemical media environment in certain temperature for a long time. Developed by SWD Urethane Co., USA, the storage tank tower equipment internal special anticorrosion coating has excellent adhesive strength and mechanical performance with metal substrate, high anticorrosion performance on various media, providing a good protection for the long-term application of tank and tower equipment.

                                                                                  

  Characteristics              The high performance polyurea polyurethane prepolymer resign in the coating has excellent inherent anticorrosion properties of acid resistance, alkali resistance, salt resistance, oil resistance, water resistance and many chemical media resistance. Coating is smooth, tough, with high adhesive strength, temperature variation. It is one component environment friendly product，certificated as "Green Star “ material which has no benzene solvent, no catalyst and no construction performance pollution.

                                                                                  

  Specifications

  Adhesive strength                               10.7 Mpa

   Impact resistance                                ≥50kg·cm

  Temperature variation                             -40------+180℃

  Wear resistance（700g/500r）                      9.5mg

  Acid resistance (50%H₂SO₄ or 20%HCI, 30d)           no rust no bubbles no peel

  Alkali resistance 50%NaOH, 30d                     no rust no bubbles no peel

  Salt resistance 80g/L, 30d                           no rust no bubbles no peel

  Salt spray resistance 1000h                          no rust no bubbles no peel

  Oil resistance 0# diesel crude oil 30d                  no rust no bubbles no peel

                                                                                

  Data of performance

  Color                        Multiple colors as customers’ need

  Luster                        glazed

  Density                       1.05g/cm

  Volume solid content            79%±2%

  VOC                         ≤179g/L

  Recommended dry film thickness   150-250μm

  Theoretical coverage             0.20kg/sqm (calculated by the above solids percentage and dry film thickness of 150 microns)

  Practical coverage                Allow appropriate loss rate

  Dry time                       1-3h

  Overcoating interval              min: 3h, max: 26h

  Overcoating method              Airless spray, Air spray, Brush, Roller

  Flash point                      57℃

                                                                                    

  Recommend procedures

                           

  No.	Name of products	Layers	Dry film thickness（μm）
  1	SWD one component iron oxide red anticorrosion primer	1	50
  2	SWD industry tank, tower bed liner anticorrosion coating	1	80
  3	SWD industry tank, tower bed liner anticorrosion coating	1	70
  Total		3	200

   

                                                                                  

  Application scopes          various storage tank, tower equipment of industry plant.

                                                                                   

  Shelf life                 10 months (Indoor with dry and cool conditions)

                                                                                   

  Packing                    20kg/bucket. 25kg/bucket

                                                                                   

  Production area             Minhang District, City of Shanghai （25% of raw materials  imported  from SWD US）

                                                                                   

  Security                   To apply this product must be accordance with the relevant national regulation of sanitation, safety and environment. Avoid contacting the wet coating.

                                                                                   

  Global applicability         Our company aims to provide worldwide customers the same coatings, but sometimes, some small adjustments are made to satisfy each region conditions and international norms, in this case, an alternative product data will be provided.

                                                                                          

  Integrity declaration         Our company guarantees the reality of the listed data, due to the diversity and variability of the application environment, please test and verify it before use. We don’t take any other responsibilities except the coating quality self and reserve the right of modification the listed data without prior notice.