SWD POLYURETHANE (SHANGHAI) CO., LTD

pure polyurethane spray rigid elastomer anticorrosion wear resistance coating

• Category :

  Paint and Coatings

• CAS NO :

• EC NO :

• Molecular Formula :

• Molecular Weight :

• Main Specifications :

• Product description :

           SWD958 Series SH103 Two components pure    polyurethane spray rigid elastomer

    anticorrosion wear resistance coating

   ­­­­­

  Descriptions              Large pipelines (petroleum, natural gas, etc.) are designed to  use 30-50 years or even longer which requires an effective anticorrosion protection. SWD Urethane Co., USA researched and developed two components pure polyurethane spray rigid elastomer coating in the 1980^th. This coating product applies 100% polyurethane material, film molded in once spraying on site spray, with high performance efficient. It is a green environmentally friendly product without solvent volatilization. With excellent anticorrosion, wear resistance performance, it has been widely used in the projects of gas pipeline, oil pipeline, pickup trucks and tanks, etc.

                                                                                  

  Characteristics             Coating appearance shows smooth, dense and tough. With high adhesive strength, excellent tensile strength, tear strength, impact strength and wear resistance, it can bear the heavy impaction and high flow brush of liquid, with stable chemical resistance, anti normal corrosion media, such as acid, alkali, salt, seawater, etc. no blister, no peel off after long period sinks in corrosion solvent.

                                                                                  

  Specifications

  Adhesive strength (concrete base)               3.5Mpa

  Adhesive strength (steel base)                  11.6Mpa

  Tear strength                                83kN/m

  Tensile strength                              32Mpa

  Elongation                                  65%

  Temperature variation                         -40------+120℃

  Wear resistance（700g/500r）                  9mg

  Acid resistance 10%H₂SO₄ or 10%HCI, 30d        no rust no bubbles no peel

  Alkali resistance 10%NaOH, 30d                 no rust no bubbles no peel

  Salt resistance 30g/L, 30d                       no rust no bubbles no peel

  Salt spray resistance 2000h                      no rust no bubbles no peel

  Oil resistance 0# diesel Crude oil 30d              no rust no bubbles no peel

                                                                                   

  Data of performance

  Color                        Multiple colors as customers’ need

  Luster                        glazed

  Density                        0.98g/cm³

  Volume solid content             99%±1%

  VOC                          0

  Recommended dry film thickness   1000-3000μm

  Theoretical coverage             1.96kg/sqm (calculated by the above solids percentage and dry film thickness of 2000 microns)

  Practical coverage                Allow appropriate loss rate

  Dry time                       5-20s

  Overcoating interval              min: 1h, max: 24h

  Overcoating method          Special polyurethane spray equipment (imported or local support)

  Flash point                      200℃

                                                                                    

  Recommend procedures                        

  No.	Name of products	Layers	Dry film thickness（μm）
  1	SWD special primer	1	50
  2	SWD two components pure polyurethane spray coating	1	2000
  Total		2	2050

                                                                                  

   

  Application scopes           Metal tanks, large pipelines, natural gas pipeline internal and external wall anticorrosion, containers, pickup truck carriages, dump truck carriages wear resistant liner, decorative protection of speaker products surface.

                                                                                  

  Shelf life                   6 months (Indoor with dry and cool conditions)

                                                                                  

  Packaging                 Component A: 220 kg/bucket, component B: 200kg/bucket

                                                                                   

  Production area            Minhang District, City of Shanghai (15% of raw materials imported from SWD US)

                                                                                   

  Security                   To apply this product must be accordance with the relevant national regulation of sanitation, safety and environment. Avoid contacting the wet coating.

                                                                                   

  Global applicability         Our company aims to provide worldwide customers the same coatings, but sometimes, some small adjustments are made to satisfy each region conditions and international norms, in this case, an alternative product data will be provided.

                                                                                         

  Integrity declaration         Our company guarantees the reality of the listed data, due to the diversity and variability of the application environment, please test and verify it before use. We don’t take any other responsibilities except the coating quality self and reserve the right of modification the listed data without prior notice.