Taian Health Chemical Co., Ltd.

Ferric Chloride

• Category :

  Inorganic chemicals

• Synonyms :

  ferric chloride anhydrous;Iron (III) chloride anhydrous;Ironchlorideanhydrous;iron trichloride;Ferric trichloride;Ferric chloride;Ferric chloride, anhydrous;Iron chloride;

• CAS NO :

  7705-08-0

• EC NO :

  231-729-4

• Molecular Formula :

  FeCl₃

• Molecular Weight :

  162.21

• Main Specifications :

  Al2O3:30%min

• InChI :

  InChI=1/3ClH.Fe/h3*1H;/q;;;+3/p-3

• Packing :

  25kg/polypropylene woven bags with inner plastic bag, 25kg/PE bag

• Product description :

  Ferric Chloride Anhydrous 96%

   

   Ferric Chloride is inorganic macromolecular coagulant, which is made by polyaluminum chloride complexing with polymeric. Therefore, the molecular structure is enlarged; the capacity of neutralization and bridging adsorption is enhanced. It is an ideal chemical to treat heavily organic-polluted raw water as well as low-temperature and low-turbidity, low-temperature and high-turbidity water.

   

  1.Properties

       Ferric Chloride  combines the coagulate advantages of aluminum salt and ferric salt; can lead to quick formation of close flocs and rapid precipitation.

      Ferric Chloride has wide-range adaptability to the waters at different temperatures and a good solubility.

  The dosage is smaller than that of other flocculants, which is better for improving the quality of treated water.

  It is suitable for the automatic dosing.

  2.Specifications       

   

  Item	PAFC-DT
  Density (20) (g/cm3) ≥
  Al2O3(%)≥	30
  Fe2O3(%)≥	4.0
  Basicity (%)	40-90
  Insoluble substance (%)≤	0.3
  PH1% water solution	3.5-5.0
  NH3-N (%)       ≤	0.01
  As (%)   ≤	0.0002
  Cr6+(%)≤	0.0005
  Hg (%)≤	0.00001
  Pb (%)≤	0.001
  Cd (%)≤	0.0002
  NoteThe mass fractions of NH3-N, As, Pb, Cd, Hg and Cr6+ are calculated based on that of Al2O3 as 10.0%

   

  3.Application Method & Notes:

  1. The liquid product can be dosed directly or dosed after dilution. Dilution is necessary before dosing for the solid product. The normal dilution ratio for the solid product is 2%-20%, and 5%-50% for the liquid product (based on weight percentage).

  2. The specific dosage is based on the flocculation tests and trials by the users. The usual dosage of the liquid product is 3-40 g/ton, and of the solid product, 1-15 g/ton.

  3.The product can not be stored with other chemicals.

  4. For the liquid product, we provide special tanks for transportation to the clients, and afford the storage tank. The solid product is packed in inner plastic bags and further in polypropylene woven bags, with each bag containing 25 Kg.

  5. The shelf life is six months for liquid product and one year for the solid product. The product should be stored in a dry and ventilated place, but the effect will not be affected even if it gets wet.

   

  4.Packing: 
  25kg/polypropylene woven bags with inner plastic bag, 25kg/PE bag

• Uses :

  water treatment

• Molecular Structure :