Home > Offer to Sell > Adhesives and Sealants > Packing Adhesives > 3M K-520/K-500 Primer Alternative for 3M VHB tapes to PP, EPDM,TPU,TPO,PVC
3M K-520/K-500 Primer Alternative for 3M VHB tapes to PP, EPDM,TPU,TPO,PVC
Inquiry
| Post Date: | Sep 11,2017 |
| Expiry Date: | Sep 11,2018 |
| Detailed Description: |
Specs:3ml, 100ml, 946ml Payment Method: T/T Product Description CNHYBOND 944 Tape primer can be used to promote adhesion of double side adhesive(such as 3M VHB, 3M9080, 3M9448, Japan 5000NS, SONY T4000,T4720,TESE4940 etc.) to surfaces such polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces. It can successfully replace : 3M K500,3M K520,3M 4298,3M 94,3M4298UV. It is used for solar film,windowsfilm, Auto foil,3D Carbon Film,3D Carbon fiber sticker vinyl film,chrome Trim,Rain or shine gear, Car Trim Strip, Soft PVC Decorative Line, EPDM seal strip, EPDM seal tape(strip), Rubber seal for car truck door and window. 944 primer can be used to promote adhesion of Car Wrapping Vinyls to surfaces such as edges and deep recesses where usually you might see lifting of the Vinyls. Typical Physical properties and Performance Characteristics Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes Solids: Approximately 5%-8% Color: clear light yellow Flashpoint: -4℉ (-20℃) Net Weight: 780-800grams per liter Viscosity: 40±5cps Application Techniques Surface preparation: The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture,A clean lint-free cloth should be used. Application: Shake CNHYBOND 944 primer well before using: 1. Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow cnhybond 944 primer to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature, Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 application of CNHYBOND 944 primer for uniform coverage and good adhesion.. 2. Allow first application of primer to dry before applying the second coat, CNHYBOND primer 944 may be applied with brush or swab, It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment Clean up: Cnhybond 944 primer can be removed with isopropyl alcohol,Vigorous scrubbing may be required Shelf life 1. 12 months from date of manufacture when stored in the original container at 15-27℃ 2. Keep cnhybond tape 944 primer in the original container 3. Keep original container tightly sealed to avoid solvent evaporation |
| Company: | heng ying adhesive co.,Ltd [ China ] |
| Contact: | Shirley Hong |
| Tel: | +86-752-7803352 |
| Fax: | +86-752-7803351 |
| Email: | hengying@cnhybond.com |
-
Disclaimer statement:The information and data included above have been realized by the enterprises and compiled by the staff, and are subject to change without notice to you. The Chemnet makes no warranties or representations whatsoever regarding the facticity, accuracy and validity of such information and data. In order to ensure your interest, we suggest you chose the products posted by our gold suppliers or VIP members.
