AMPS Well Cementing Filtration Reducer RK-13S
Inquiry
| Post Date: | Nov 30,2016 |
| Expiry Date: | May 29,2017 |
| Detailed Description: |
Payment Method: T/T;L/C AMPS WELL CEMENTING FILTRATION REDUCER RK-13S PHYSICAL AND CHEMICAL INDICATORS Appearance: White or faint yellow powder Bulk Density, g/cm3: 0.70±0.20 Water-Solubility: 100% 0.315mm Sieve (45 mesh) Residues, %: <12 CEMENT SLURRY PRESCRIPTION Cement Slurry Density: 1.90±0.01g/cm3(in fresh water, W/C=0.44, in 18% salt water, W/C=0.57) Recommended Dosage in Fresh Water and Moderate Temperature System: 0.9%(BWOC) or 0.50 lb./sack Recommended Dosage in 18% Slat Water and Moderate Temperature System: 1.25%(BWOC) or 0.69 lb./sack Recommended Dosage in 18% Salt Water and High Temperature System: 2.5%(BWOC) or 1.38 lb./sack Note: The formula is based on 55 lb. /sack cement. According to the difference of cement, mixing water and slurry density, the dosage should be adjusted. The dosage should be increased when used in high concentration salt water and high temperature. The specific content needs to confirm. Characteristics Very effective fluid loss additive with high purity and low dosage. Provide Fluid loss control in low, normal or high density cement slurris. Temperature Range: 0-180oC（32-356oF，BHCT） Use in freshwater, or salt water, salt-tolerant up to saturation. The cement slurry system is stable with little free fluid. Do not retard, and set cement’s compressive strength develops fast. Good fluidity, will not lead to over-disperse or thickened and no need to add additional dispersant. Compatible well with other additives. Suitable for all API classes of cement. Mix with water or dry mix, no water quality required and soluble in cold water. PACKING AND STORAGE It is packed with 25kg bag. It can also be packed according to user requirements. Normally used within 18 months after production. If expired, test should be done to confirm the quality. Store in ventilated, cool and dry area, avoid exposing to sun and rain. The height of stack should be less than 8. If you have any interest in our petrochemical products, please contact us. |
| Company: | Shandong Deshi Chemical Company Limited [ China ] |
| Contact: | Smile Yang |
| Tel: | +86-546-8617929 |
| Fax: | |
| Email: | smile.yang@deshigroup.com |
-
Disclaimer statement:The information and data included above have been realized by the enterprises and compiled by the staff, and are subject to change without notice to you. The Chemnet makes no warranties or representations whatsoever regarding the facticity, accuracy and validity of such information and data. In order to ensure your interest, we suggest you chose the products posted by our gold suppliers or VIP members.
