Acidic fixing agent OK-N35
Inquiry
| Post Date: | Mar 28,2013 |
| Expiry Date: | Mar 28,2014 |
| Detailed Description: |
Special nature
• Nylon dyed fabric wet fastness enhance effective • Use pH value of 4.5 • No foam ability • Not affect light fastness of dyed fabric • Formulated into liquid and easy to deal Apply to acidic dye (such as TELON L, SUPRANOL)dyed nylon fiber, or cationic dye (e.g. ASTRAZON) dyeing anionically modified nylon fiber, wet fastness of dyed fabric enhancing agent, also be applied to direct dyes (such as SIRIUS, SIRIUS Supra, BENZO) dye (N/C) nylon/cotton blends, nylon fibers resist. General nature Chemical composition Condensation products of higher molecular weight aromatic sulphonic acids Appearance yellowish-brown liquid Density (20 degrees) 0.4g/cm Solubility Pour hot water or steam injection stir to completely dissolve Appearance (1% dilution) yellowish brown liquid 1% dilution of pH value 7.0 - 8.0 (20 ℃) Ion anion Stability Diluted acid (pH 4-5) or alkaline stability, but intolerance concentrated acid or copper salt. Together with tnon-ionic additives will produce precipitation, especially in hard water will be more serious. Safety Precautions About operating Notes and ecology, toxicology nature behavior aspects of data, please refer to OK-N35 safety indicators. Applicability of technical guide Apply to acid dyes on nylon fiber dyeing, dyeing material after treatment with acid dyes for nylon fiber dyeing, dyeing material by means of OK-N35 treatment, improve wet fastness, especially water, sea water, washing, perspiration fastness obtain significantly improve similar to all such aid, fastness of degree of improvement varies according to staining method and fiber. Concentration of 1-2%owf OK-N35 (Calculated by cloth weight) TELON L, SUPRANOL or other selection of acid dye dyed nylon fiber softener wash to clean, then dyed fabric to OK-N35 in pH4.5, 70-80 ℃, 20-30min, for post-processing. Precautions Such as increase in one-third of OK-N35 dosage, by means of hot air complete solid-color job, considerable degree of improvement in wet fastness, only temperature should not exceed 180-185 °C, temperature exceeds or saturated vapor, OK-N35 would be affected. Dissolved or diluted OK-N35 must prevent directly contact with concentrated acetic acid, OK-N35 contact with concentrated acetic acid, can cause precipitation, any occurrence of precipitation can easily add small amount of ammonia dissolved. In post-treatment bath, if non-ionic additives exist, will cause precipitation to detriment OK-N35 effect (available dispersing agent wash before fixative, can prevent exception occur). Dyed materials after projecting, have to do PU coating or cover film, then not do OK-N35 solid color process, otherwise it will affect their sticky cloth effect. Nylon cotton OK-N35 after handling feel thicker, have an impact on its textile jobs. So dye only select wet fastness dye, not do solid color processing. Fixing standard operating: first diluted acetic acid into bath, pH adjust to about 4.5, OK-N35 dissolved with hot water (above 80 °C), and pour into dosing tank, control temperature at 50-60 ℃, then OK-N35 dilution dissolve into bath, and at 70-80 °C for 20-30 minutes solid color, solid color and then dry softener wash clean. |
| Company: | Shishi Lvyu Chemical Trade Co.,Ltd [ China ] |
| Contact: | Lai Wanglin |
| Tel: | 86-595-88959773 |
| Fax: | 86-595-28130597 |
| Email: | admin@5422.cn |
-
Disclaimer statement:The information and data included above have been realized by the enterprises and compiled by the staff, and are subject to change without notice to you. The Chemnet makes no warranties or representations whatsoever regarding the facticity, accuracy and validity of such information and data. In order to ensure your interest, we suggest you chose the products posted by our gold suppliers or VIP members.
