Home > Offer to Sell > Catalyst and Auxiliary > Catalyst > Degussa OCTEO

Degussa OCTEO

Inquiry
  Post Date: Nov 21,2024
  Expiry Date: May 20,2025
  Detailed Description: Cas No. :2943-75-1 Specs:98%
KH-350 is high purity, undiluted N-octyltriethoxy-silane


Product: Silane coupling agent KH-350
Chemical Name: n-Octyltriethoxysilane;Triethoxyoctylsilane
CAS No.: 2943-75-1





Silane coupling agent KH-350

Product: Silane coupling agent KH-350

Chemical Name: n-Octyltriethoxysilane; Triethoxyoctylsilane

CAS No.: 2943-75-1

Structure formula:



FEATURES

Can be used in the formulation of water repellent products

Produces a hydrophobic treatment that inhibits water absorption

Can improve dispersion of polar fillers in covalent matrices



BENEFITS

Small molecular structure for deep penetration of concrete surfaces

Surface modification can improve compatibility to nonpolar substrates



APPLICATIONS

Commercial buildings

Parking decks/garages

Highways

Bridge structures

Filler modification





TYPICAL PROPERTIES

Color Clear

Purity 98%

Specific Gravity at 25°C (77°F) 0.875

Flash Point, closed cup 63 (>145)

Density °C (°F)73

Volatile Organic Compound (VOC) Content lb/gal 329

Solvent (Thinner)Isopropanol, ethanol or various



DESCRIPTION

KH-350 is high purity, undiluted N-octyltriethoxy-silane. When diluted with an appro-priate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance.



KH-350 can also be used to improve the compatibility of mineral fillers or pigments in polyolefins or to ease their dispersion in nonpolar matrices.



KH-350 is a small molecule to allow for deep penetration into the cementitious surface. This material reacts with moisture in the air and in the substrate in the presence of an alkaline or acidic environment to produce hydroxy groups. These hydroxy groups will bond with the substrate and itself to produce a hydrophobic treatment that inhibits water absorption into the substrate. An alkaline environment, such as new concrete, will catalyze the reaction and speed the formation of the hydrophobic surface.



HOW TO USE

Dilution

It can be diluted in solvents such as alcohols, chlorinated solvents, aliphatic solvents and low molecular weight cyclic polydimethylsiloxane Typical dilution levels are 40 percent and 20 percent KH-350 in a solvent.



Blends of the solvents can also be used. The evaporation rate of the diluted material can be modified depending on the type and concentration of the solvent. Select the proper solvent for your application, as some silane/solvent blends may darken the surface. Refer to the manufacturers data sheet for proper handling and disposal of solvents.



NOTE: When using any solvent, always provide adequate ventilation. Follow handling precautions on the solvent container label.



Application

Methods of application include airless sprayer, roller and brush. When a brush or roller is used, repeated applications should be made until the surface remains moist for a few minutes. If an airless sprayer is used, application should continue until the substrate is thoroughly saturated. Sprayers should be fitted with solvent resistant hoses and gaskets.



A test application is necessary on each surface to be treated to ensure compatibility and the desired water repellent result. Surfaces should be free of standing water, surface dirt, dust, oils and other contaminants. Formulated KH-350 may be applied to damp surfaces although dry surfaces are preferred to achieve maximum penetration into the substrate.



Any plants or shrubs should be protected from exposure to the treatment. Any material that should not be exposed to solvents should also be protected.

  CAS Registry Number:

2943-75-1
  Synonyms: ;n-Octyl triethoxysilane;Triethoxyoctylsilane;octyltriethoxysilane;(Octyl)-triethoxysilane;
  Molecular Formula: C14H32O3Si
  Molecular Weight: 276.4876
  Molecular Structure: 2943-75-1 N-octyltriethoxysilane
  Hazard Symbols:  Xi:Irritant;
  Risk Codes: R36/37/38:;
  Safety Description: S26:;
S37/39:;

  Company: Hangzhou Feidian Chemical Co.,Ltd     [ China ]          
  Contact: Elvis Jiang
  Tel: 86-21-54179062
  Fax: 86-21-54179379
  Email: elvis@feidianchem.com
Disclaimer statement:The information and data included above have been realized by the enterprises and compiled by the staff, and are subject to change without notice to you. The Chemnet makes no warranties or representations whatsoever regarding the facticity, accuracy and validity of such information and data. In order to ensure your interest, we suggest you chose the products posted by our gold suppliers or VIP members.