Home > Offer to Sell > Adhesives and Sealants > Silicone Sealants > Excellent adhesiveness silicone glue for junction box

Excellent adhesiveness silicone glue for junction box

Inquiry
  Post Date: Jul 16,2016
  Expiry Date: Jan 12,2017
  Detailed Description: Quantity: 100Kilograms
Price:9 USD Kilograms
Payment Method: T/T
Before the curing
Appearance White paste
Relative density 1.60~1.70(g/cm3)
Surface drying time ≤15(min)

After the curing
Tensile strength ≥1.5(MPa)
Elongation At Break ≥150(%)
Shear strength ≥2.0(MPa)
Hardness 35~45(Shore A)
Temperature Range -60~200(℃)
Volume resistivity 2.2×1015 (Ω·cm)
Dielectric strength 20 (kV/mm)
Thermal conductivity ≥0.8[W/(m·k)]
Dielectric constant 3.12(1.2MHz)

Packaging: 300mL / tube,25tubes / box.

NOTE

After operating, the rest of glue must be sealed to store , and tightened the cap immediately. when using it in the next time, if there is a little crust in sealed place, to remove it and it will not affect the normal application. the process of storage , the canal orifices may appear the phenomenon of the curing, to clean it then it can be used again, and the performance of product is not affected.
SPECIFICATION TRANSPORT
STORAGE
1,6 months shelf life if stored below 25 ℃ in cool, dry place, when the product passed its expiration date, it should be confirmed without abnormal phenomenon, then that can be used.
2,These products don't belong to dangerous goods, so they can be transported as normal chemicals. But be careful of leakage.


FAQ
1. What is the main application about it?
Well protect against moisture,dust, and have excellent insulating property for electronic components.
Internal coating material in transistor and intergrated circuit.
Trasparent power pouring material.
Elastic adhesive in optical device.
Silicone bra for women.
2. How to correctly use it ?
A, B glue mixed according to the weight of the 1:1 ratio,and after rowing of bubble it can be used. In order to improve defoaming speed ,in the process of mixing, and repeat the above step for two to three times.
It should be thoroughly remove oil, dirt and other material on the base material before we use the glue.
3. What should I notice during the using process?
There are some materials, such as chemical additives, curing agent and plasticizer can inhibit the curing.These materials include:
Organic tin and other metal compounds.
Sulfur, polysulfide, polysulfone or other sulfur containing items .
Amine, polyurethane rubber or other ammonia containing items.
The phosphorus or phosphorus containing items.
Some of the flux.
If you are not sure, it is recommended that firstly do the applicability test before using.


  Company: Guangzhou Usilicone chemical material Co.,Ltd     [ China ]        
  Contact: Joe Lu
  Tel: +86-769-88888312
  Fax:
  Email: joe@usilicone.com
Disclaimer statement:The information and data included above have been realized by the enterprises and compiled by the staff, and are subject to change without notice to you. The Chemnet makes no warranties or representations whatsoever regarding the facticity, accuracy and validity of such information and data. In order to ensure your interest, we suggest you chose the products posted by our gold suppliers or VIP members.