Home > Offer to Sell > Paint_and_Coatings > Powder_Coating > Heat Transfer Printing Powder Coatings

Heat Transfer Printing Powder Coatings

Inquiry
  Post Date: Sep 16,2016
  Expiry Date: Mar 15,2017
  Detailed Description:

Introduction:

l          This type of thermosetting powder coatings are applicable to thermal transfer printing process.

l          The cured coating after the thermal transfer printing process, can be clear veins, beautiful color of patterns.

Applications:

Can be widely used in aluminum windows and doors, indoor metal furniture, security doors, car painting, etc.

Features:

This powder coating can reach the general performance requirements, the performance of its features are applicable to thermal transfer technology. The cured coating after the thermal transfer process, can be clear veins, beautiful color of patterns. And the thermal transfer film is easy to remove, no residual traces, can be adjusted according to the different thermal transfer process recipe to achieve the best results.

Technical Data:

Powder Property

Gravity

1.2~1.8g/cm3

Particle Size

General 30~38um<64um >99%. If any special needs, can adjust

Volatile

1%

Soft Point

60~95 depend on the color and gloss

Fluidity

Good flow properties and transport properties

Storage Stability

Store under 30, with the shelf life of 12 months

 

Film Property

Coverage

8 -12 m 2 /Kg film thickness 70 μm 100% powder calculate

Accelerated Aging

ASTM-G151

Pass

Impact

ASTM-D2794

Pass

Flexibility

ASTM-D4145

3 mm

Cup Convex

   GB/T 9753

>6mm

Adhesion

ASTM-D3359

0 Grade

Hardness

ASTM-D3363

>80

Poach

GB/T 1733/1993

No foaming, no color change

Acids

ASTM-D3260

Pass

Solvent

ASTM-D2248

Pass

Film Thickness

60-70μm

Salt Spray

ASTM-B117

1000 hours

Pass

Heat Resistant

GB/T 1740

1000 hours

Pass

Application Condition

Pretreatment

Steel

Phosphating

Inspection requirements of the pre-treatment testing once every two hours

Spray

This series of products for the following spray method: electrostatic spray; friction electrostatic spray; electrostatic fluidized bed coating (Require in advance); hot dipping fluidized bed (Require in advance);etc.

Note: the quality of the spray test at least once every two hours

Curing

Recommend 200 x 10 minutes, 180 x 15 minutes

 

Packing and Storage:

Polyethylene bag and paper carton, net weight: 20kg. Non-hazardous materials, can be transported by variety of ways. Should avoid direct sunlight and avoid damp heat, avoid contact with chemical substances.

 

 

 

 

 

Warranty Policy: The surface preparation and application procedures and other factors that affect performance are beyond our control.

Changming assumes no liability for coating failure other than to supply replacement material for the coating shown to be defective.

Do not use this product until the current material safety data sheet has been read and is fully understood. Changming shall not be liable for any injuries, damages or other losses deriving directly or in consequence of purshaser's use of product. Purchaser shall determine the suitability of this product for his own use, and thereby assumes all risks and liabilities in connection therewith.



  Company: Zhejiang Changming Chemical Products Co.,Ltd.     [ China ]        
  Contact: Mr david chen
  Tel: +86-576-83669333
  Fax: +86-576-83669333 3662268
  Email: sales@changming.com.cn
Disclaimer statement:The information and data included above have been realized by the enterprises and compiled by the staff, and are subject to change without notice to you. The Chemnet makes no warranties or representations whatsoever regarding the facticity, accuracy and validity of such information and data. In order to ensure your interest, we suggest you chose the products posted by our gold suppliers or VIP members.