Home > Offer to Sell > Catalyst and Auxiliary > Other Auxiliary Agent > Hydrophilic textile softener DC-HP product information

Hydrophilic textile softener DC-HP product information

Inquiry
  Post Date: Mar 29,2013
  Expiry Date: Sep 25,2013
  Detailed Description: Product Description
DC-HP hydrophilic textile softener is new generation of revolutionary silicone patented product, has excellent feel and outstanding stability. Under extreme conditions of alkaline and high temperature and lead to traditional amino-modified silicone oil emulsion breaking and floating oil, DC-HP has good stability; based on lower than normal amount of traditional products, DC-HP is still can give all kinds of yarn and fabric soft, smooth and plump feel, as well as durable hydrophilic properties.
DC-HP hydrophilic textile softener is applied on variety of fibers and fabric, can give excellent feel, also has very low yellowing properties, compared with conventional amino-modified silicone emulsion. DC-HP hydrophilic textile softeners dilution even in the case of pH14 strong base and 100 °C high temperature boiling also has excellent shear stability. It is an ideal product to avoid silicone oil spot flaws in textile printing and dyeing mill needs stripping or repair color processing soft finish fabric.
Key features and benefits
* Amazing silicone soft and almost no yellow degeneration
* Apply to all cotton, chemical fiber and blended fabric
* Lasting hydrophilic properties
* Excellent pH stability and shear stability
* Good Lasting softness and washability
* Easy to operate, can dilute with water, minimal agitation
* Compatible with most of processing additives
* Easy decontamination finishing agent through bath use with organic fluorine class
* Can easily peel off from finishing fabric
Typical product data
Products typical data value is not available as product standard. Contact with Shishi City Lvyu Chemical Trading Co., Ltd. can get assist and product standards.
Application Process
DC-HP hydrophilic textile softener is super softener, suitable for all types of yarn and fabric: cotton, chemical fiber and cotton/synthetic blends. DC-HP with easy care resin bath for garment finishing, can also use with organic fluorine classes finishing agent with bath to dirt repellent finishing. DC-HP hydrophilic textile softener usually first directly diluted with water in adding finishing bath applications. DC-HP water dilution under conditions of strong base and high temperature has excellent shear stability, can apply to conventional emulsion type softener



can not display sufficient shear stability. DC-HP and its diluted water in wide pH (3-14pH) environment is very stable, which is generally of aligning standard process as traditional emulsification of amino-modified silicone products are unable to do.
Instructions for use
DC-HP hydrophilic textile softener is very convenient to use, can use directly, can also simple dilution with water before use. The best finishing process and methods depend on after stain and rinse yarn fabric required softness and feel requirements。

1. Padding process
Dosage 3-5 g/l (thin fabric) 4-6 g/l (thick fabric)
pH 4-5 (adjust with glacial acetic acid)
Temperature 20-40 ℃
Liquid carrying rate 65-100%
Dried 100-130 ℃ 1-2 minutes
Curing 150-180 ℃ 1-3 minutes
2. Impregnation process
Dosage 0.3-1.0% (calculated by weight of fabric)
Bath ratio 1/10-1/20
pH 4-5 (adjust with glacial acetic acid)
Temperature 30-50 ℃
Time 20-30 minutes
Dried 100-130 ℃
3. Garment washing process
Dosage 0.3-1.0% (calculated by weight of fabric)
Conditions impregnation process
Preparation of dilutions
DC-HP can use directly, can also dilute to concentration of any activity. The desired concentration of product range is 5.0-30.0% according to the following procedure.
Formula # 1 # 2 # 3 # 4
DC-HP hydrophilic fabric softener (%) 5 10 20 30
Ethoxylated fatty alcohol-15EO - ~ 0.3 ~ 1.0 ~ 1.5




Antimicrobial agent (%) 0.05 0.05 0.05 0.05
Water (%) 94.95 89.65 78.95 68.45
1. Pour water and surface active agent into mixer, stir at speed of 400rpm until surfactant completely dissolved
2. Under stirring, slowly add DC-HP hydrophilic fabric softener, and continue stirring for 5 minutes
3. If required, add fungicide. Then stir for 10 minutes
4. Filter into container

DC-HP hydrophilic textile softener removal
* Formula for cotton fabric
2-5 g/l NaOH
2-3 g/l SDBS (sodium dodecyl benzene sulfonate, 30%)
Water
* Formulations for polyester fabrics
2-5 g/l Na2CO3
2-3 g/l AE-15 (ethoxylated fatty alcohol-15EO)
* Removal process
Pour fabric and water into machine
Cotton fabric add NaOH and SDBS, polyester fabric add Na2CO3 and AE-15
Heat to 100 °C, and continued boiling for 60 minutes
Cool to 60 °C, adjust PH value to 5-6 with glacial acetic acid
Water to clean fabric
Handling and Storage
In order to ensure the quality of products, container when not in use should be tightly sealed, store in normal room temperature, avoid long-term exposure to extreme hot and cold environment, because products may cause stratification. If product is layered, stir before use. If product is frozen, heating thawing, stirring after thawing.


  Company: Shishi Lvyu Chemical Trade Co.,Ltd     [ China ]        
  Contact: Lai Wanglin
  Tel: 86-595-88959773
  Fax: 86-595-28130597
  Email: admin@5422.cn
Disclaimer statement:The information and data included above have been realized by the enterprises and compiled by the staff, and are subject to change without notice to you. The Chemnet makes no warranties or representations whatsoever regarding the facticity, accuracy and validity of such information and data. In order to ensure your interest, we suggest you chose the products posted by our gold suppliers or VIP members.