Home > Offer to Sell > Catalyst and Auxiliary > Other Auxiliary Agent > LUY high concentrated anti-dyed powder

LUY high concentrated anti-dyed powder

Inquiry
  Post Date: Mar 28,2013
  Expiry Date: Mar 28,2014
  Detailed Description: Special nature
• Effective to enhance wet fastness for nylon dyed fabric
• pH value is 4.5
• Foamability
• Does not affect light fastness of dyed fabric
• When formulated into liquid easy to deal
Apply to Acidic dye (such as TELON L, SUPRANOL)dye nylon fiber, or cationic dye (e.g. ASTRAZON) dye anionically modified nylon fiber, enhancing agent for wet fastness of dyed fabric, also apply to direct dyes (such as SIRIUS, SIRIUS Supra, BENZO) dye (N/C) nylon/cotton blends, good resist effect to nylon fiber.
General nature
Chemical composition Condensation products of higher molecular weight aromatic sulphonic acids
Appearance yellowish brown powdery
Density (20 degrees) 0.4 g/cm
Solubility Pour hot water or steam injection stir to completely dissolve
Appearance (1% dilution) yellowish brown liquid
1% dilution of pH value 7.0 - 8.0 (20 ℃)
Ion anion
Stability
Diluted acid (pH 4-5) or alkaline stability, but intolerance concentrated acid or copper salt. Use with non-ionic additives, will produce precipitation, especially in hard water will be more serious.
Safety Precautions
About operating considerations and ecological, toxicological properties of behavior of data, refer to LUY flour safety indicators.
Applicability of technical guide
Khan firmly applied to the treatment after a nylon fiber dyeing, dyeing acid dyes acid dyes on nylon fiber dyeing, dyeing materials by LUY powder processing, in order to improve the wet fastness, especially water, sea water, washing resistance degrees obtain significant improvement, similar to all such aid, the fastness of the degree of improvement varies according to the staining method and fiber.
Concentration of 1-2% owf LUY powder (Calculated by cloth weight)




TELON L, SUPRANOL or other selection of acid dye dyed nylon fiber, wash to clean with soft water, then dyed fabric do post-processing, LUY powder at pH4.5, 70-80 ℃, 20-30min.

Precautions
Such as increasing LUY one-third of dosage and also fixing operation accomplished by means of hot air, considerable degree of improvement on the wet fastness, only temperature should not exceed 180-185 °C, if temperature exceed or saturated vapor to handle, LUY would be affected.
Dissolved or diluted, LUY must prevent direct contact with concentrated acetic acid, because LUY contact with concentrated acetic acid, will cause precipitation, any precipitate can easily add small amount of ammonia dissolved.
In the post-treatment bath, if non-ionic additives exist, will lead to precipitation occur and damage LUY effect (laking wash available dispersant, can prevent exception occur).
If dyed materials during after engineering, do PU coating or cover to film, then not do solid color processing with LUY powder, otherwise it will affect their sticky cloth effect.
Nylon cotton do post-processing with LUY feel thicker, influence its textile jobs. Only select wet fastness dyed, not do solid color processing for this dyeing.
Fixing standard operating: first diluted acetic acid into bath, pH adjust to about 4.5, OK-N35 dissolved with hot water (above 80 °C), and pour into dosing tank, control temperature on 50-60 ℃, then LUY dilution dissolved into bath at 70-80 °C for 20-30 minutes to solid color, after solid color, wash to clean with soft water.


  Company: Shishi Lvyu Chemical Trade Co.,Ltd     [ China ]        
  Contact: Lai Wanglin
  Tel: 86-595-88959773
  Fax: 86-595-28130597
  Email: admin@5422.cn
Disclaimer statement:The information and data included above have been realized by the enterprises and compiled by the staff, and are subject to change without notice to you. The Chemnet makes no warranties or representations whatsoever regarding the facticity, accuracy and validity of such information and data. In order to ensure your interest, we suggest you chose the products posted by our gold suppliers or VIP members.