MDF powder coating

MDF Powder Coating and Coated Technics

MDF powder coating is a durable thermosetting coating finish that fully encapsulates the MDF board with excellent mechanical properties and chemical performance.

Recommended Application

For MDF furniture and hardware finishes, such as commercial furniture, residential furniture, retail displays, office fitouts, kitchen and bath cabinets, etc.

Key Features

l          Environmental friendly:  no solvents and volatile organic compounds involved which are harmful to the environment

l          Energy saving: low curing temperature

l          Excellent mechanical properties and chemical resistance

Properties

Color: According to customers requirements

Appearance: Sand texture

Density: 1.2-1.7 (This data would change by the color difference)

Gloss: 10-80% (60°)

Storage: 3-6 month within 25℃ in dry and cool condition.

Application Reference

Spaying method: electrostatic spaying

Timber treatment: polish and clean the surface according to the actual requirement

Timber moisture content: 4%-8%

Pre-heat temperature: the substrate temperature is about 60℃

Curing condition: Circulated heating by infrared and hot air. 110 ℃ ~ 150 ℃ (surface temperature of the substrate), 5 ~ 20 minutes, according to the production line

Notes

l        Not suitable for outdoor use

l        Spraying effect is affected evidently by the different kind of MDF substrate

l        The color and appearance would not affected by spraying thickness

l        Laboratory panel is different from factory panel. It need to adjust the spraying reference

Transportation and Storage

l        20kg/carton

l        It is not hazardous article, so it has no specific transportation requirement

l        Store in dry and cool place under 25℃

l        The shelf-life is 3-6 month

Warranty Policy: The surface preparation and application procedures and other factors that affect performance are beyond our control.

Changming assumes no liability for coating failure other than to supply replacement material for the coating shown to be defective.

Do not use this product until the current material safety data sheet has been read and is fully understood. Changming shall not be liable for any injuries, damages or other losses deriving directly or in consequence of purshaser's use of product. Purchaser shall determine the suitability of this product for his own use, and thereby assumes all risks and liabilities in connection therewith.