NFS9300 LOW COMPRESSION SET SERIES

FEATURES:

Low compression set

Good mechanical properties

Excellent solvent, oil, fuel resistance

Maintains properties over a wide temperature range

TYPICAL PHYSICAL PROPERTIES

*Appearance:Pale yellow, neat, no obvious mechanical admixture.

*Above values only represent typical values, products with various features can be supplied according to customer requirements.

〖PROCESSING ADVICE〗

Various organic peroxides will vulcanize these fluorosilicone compounds. Fabricators should make their own selection of curing agents on the basis of methods of manufacturing, desired properties, and safety considerations. Curing agent can be mixed into the compounds. The optimum curing procedures will depend on the process methods you use and the physical dimensions of the vulcanized product. It is usually necessary to post cure the products in air oven after molded cure.

〖Usage〗

Adding 0.6~0.8 phr curing agent (DBPH recommended)

Press cure: 170℃×15 mins; Post cure: 200℃×4 hrs

If customers require other curing temperature, curing system must be changed.

〖Package〗

Packed in plastic bags placed into reinforced cartons, 20kg/2bags/carton.

Shelf-life is 12 months when kept in dry and ventilated environment.

〖Notes〗

1. This product has cold-flow characteristics, should avoid bag breakage in the process of transportation and usage.

2. The product should be kept neutral, avoid contact with acid or alkaline substances.