Home > Offer to Sell > Adhesives and Sealants > Acrylic Adhesives > Zinc Alloy Die Casting Demoulding Agent

Zinc Alloy Die Casting Demoulding Agent

Inquiry
  Post Date: Nov 19,2024
  Expiry Date: May 18,2025
  Detailed Description: Product Name: Zinc Alloy Die Casting Demoulding Agent
Product ID: SilibaseRA-4ZAL
Product Performance:
● No carbon deposition performance
There will be no carbon deposition or oxide scale on the mould or casting surface, do not affect the subsequent surface treatment such as electroplating, flame plating, etc.
● Excellent demolding performance
Spray die casting mould release to the mould surface then effective components immediately form dense membrane, the membrane in the injection process effectively prevent die-casting products and the mould glue together.
● Good cooling effect
Using the die-casting mould release agent and setting the mould temperature in 150-200 ℃, the mould will not cracks caused by heat and cold stress, which shortens the work cycle.
● High temperature resistant and excellent lubricating performance
Die casting mold release agent film uniformity, not accumulation, casting surface bright and no splash. Die releasing agent for high temperature mold surface has good adhesion, can in the mold temperature up to 200DEG C under the condition of operation.
Instructions of SilibaseRA-4ZAL Zinc Alloy Die Casting Demoulding Agent:
● The recommended usage (dilution ratio): General processing: 1:120, complex processing: 1:100. Please according to the technology personnel deployment test concentration, finally to determine the best dilution ratio!
● The typical usage: 1kg release agent mixed with 100kgs purified water or mixed with 100 ~ 120 kgs diesel oil.
● If b e y o n d the typical usage, please contact us for technical support.
● Please use deionized water to dilute, helps to prolong the life of working liquid, reduce the use amount of concentrate, fully reflects the performance of the process fluid.   
● Unless the technical services allow outside, cannot add other material to concentrate and diluent. After dilution with water, it is milky white liquid.
Notice of SilibaseRA-4ZAL Zinc Alloy Die Casting Demoulding Agent:
● Die-casting mold release agents must dilute with pure water or diesel oil, dilution ratio 1:100 ~ 1:120, gently shake or stir well before use; dilution ratio according to complexity of the casting and mould deep make appropriate adjustments.
● The spray gun or automatic system pay attention to spray evenly and blow dry.
● The best mould working temperature is 150℃ to 200℃.
Shelf Life: Shelf life is 18 months. It can be stored as common chemicals.
Packing of SilibaseRA-4ZAL Zinc Alloy Die Casting Demoulding Agent:
20Kgs/barrel, 170Kgs/drum


  Company: Jiande City Silibase Silicone New Material Manufacturer Co., Ltd     [ China ]          
  Contact: Kobe
  Tel: +86-0571-64537063
  Fax: +86-0571-64537093
  Email: sales@silibasesilicone.com
Disclaimer statement:The information and data included above have been realized by the enterprises and compiled by the staff, and are subject to change without notice to you. The Chemnet makes no warranties or representations whatsoever regarding the facticity, accuracy and validity of such information and data. In order to ensure your interest, we suggest you chose the products posted by our gold suppliers or VIP members.