FP2200S halogen-free flame retardant for PP, PE, TPE, TPU
-
Post Date:
Dec 29,2018
-
Expiry Date:
Dec 29,2019
-
Detailed Description:
Cas No. :compounded mixture
Quantity: 1000Metric Tons
Specs:white powder
Price:5.0-5.5 USD Kilograms
Payment Method: L/C or T/T
PNPO-G1 is a high-performance eco-friendly halogen-free flame retardant,ROHS complied. PNPO-G1 doesn’t contain ammonium polyphosphate (APP).It can replace ADEKA FP-2200S with similar performance and lower cost.
Technical Data:
Items Spec
Appearance White free-flowing powder
P (as P2O5) content, % ≥20.0
1% TGA Temperature, °C ≥260
Average particle size, um D50≤10 ; D90≤15
PH value 5.5-6.5
Moisture,% ≤0.5
Density g/cm3 1.2
Solubility in water, 25°C , g/100mL H2O ≤0.5
Recommended dosage :
Polymer PP 20% GF-PP 30% GF-PP PE
Dosage,% 18-22 24-26 26-28 20-25
UL-94 V0(1.6mm) V0(1.6mm) V0(1.6mm) V0(1.6mm)
Polymer TPE Polyether TPU Polyester TPU LDPE/EVA
Dosage,% 30-38 33-40 17-20 33
UL-94 V0(1.6mm) V0(1.6mm) V0(1.6mm) VW-1(0.6mm)
Characteristics:
1. Halogen-free, no toxic, no corrosion, eco-friendly
2. Good weatherability, UV-resistance
3. Good compatibility with the resin, no-migration, no plate-out, thus ensuring good appearance of the final product.
4. little influence to the mechnical properties of final product
5. High thermal stability
6. Good colorability. Suitable for various coloring by request.
7. Good electrical properties, especially suitable for electronics and electrical industry.
8. Low smoke density when burning (<100), no toxic or corrosive gases produced.
9. Low dosage and high efficiency.
10.Good dispersity in polymers.
Processing instruction:
1. PNPO-G1 don’t contain Anti-dropping agent . Customer need to choose proper anti-dropping agent as required.
2. The twin-screw extruder`s processing temperature should not be too high(below 230℃). Meanwhile, we should maintain a certain vacuum in order to make the material more stable.
3. Choosing proper filler and control dosage .Normally ,the filler will reduct Flame retardant efficiency.
4. Meeting the standard of IEC60695-2-13 GWIT850℃（2.0mm）and IEC60695-2-12 GWFI 960℃
（2.0mm）.
Typical Application Data 1-1
Material Formula 1 Formula 2 Formula 3
PP(7926) 78 75 70
PNPO-G1 22 25 30
EBS 0.3 0.3 0.3
Antioxidant 1010 0.2 0.2 0.2
Antioxidant 168 0.2 0.2 0.2
PTFE 0.2 0.2 0.2
Properties 1-2
Item Testing Method Formula 1 Formula 2 Formula 3
UL94 (1.6mm) UL94-2013 V-0 2.1/10.3 V-0 1.6/7.6 V-0 0.7/4.9
LOI ASTM D2863-70 30.0% 31.0% 34.0%
Tensile Strength GB/T 1040.1-2006 22.6 Mpa 23.8 Mpa 23.8 Mpa
Flexural Strength GB/T 9341-88 33.0 Mpa 33.3 Mpa 34.4 Mpa
Flexural modulus GB/T 9341-88 1646.5 Mpa 1882.9 Mpa 2238.2 Mpa
Notch impact strength GB/T 9342-88 3.5 KJ/m2 3.1 KJ/m2 3.0 KJ/m2
Unnotched impact strength GB/T 9342-88 32.2 KJ/m2 27.1 KJ/m2 21.7 KJ/m2
Density -- 0.955 g/cm3 0.957 g/cm3 0.979 g/cm3
Typical Application Data 2-1
Material Formula 1 Formula 2
PP(T300) 75 --
TPE -- 70
PNPO-G1 24 30
Properties 2-2
Item Testing Method Formula 1 Formula 2
UL94(1.6mm) UL94-2013 V-0 V-0
LOI ASTM D2863-70 36.0% 37.8%
MI(200°C ,5KG) ASTM D1238-04 2.0 0.79
Tensile Strength GB/T 1040.1-2006 27 Mpa 10.3 Mpa
Elongation at break GB/T 1040.1-2006 60% 120%
Flexural Strength GB/T 9341-88 30 Mpa --
Flexural modulus GB/T 9341-88 1600 Mpa --
Notch impact strength GB/T 9342-88 5.6 KJ/m2 22.6 KJ/m2
Package & Storage:
Net weight 25KG Kraft bag with PE liner.
It is not dangerous cargo .You should handle the material according to the instruction described on MSDS.
-
CAS Registry Number:
compounded mixture
Inquiry