Multiple functional additive package for universal gear oils TH4209

• Post Date:

  Sep 09,2013

• Expiry Date:

  Sep 09,2014

• Detailed Description:

  Quantity: 1Metric Tons
  Specs:200kg/drum
  Payment Method: T/T;L/C
  Description
  TH4209 is formulated with a variety of additives such as extreme pressure antiwear agent and antioxidant, etc. It serves as a multiple functional additive package for universal gear oils. It works effectively to prevent gear surface from scuffing, abrasion, pitting and spalling under harsh conditions like speedy impact and high torque; and keeps rust and corrosion away from the gear surface.
  
  Applications
  
  
  Performance grade Treating rate (m%)
  CKC 1.1
  CKD 1.5
  GL-4 2.1
  GL-5 4.2
  
  Above treating rates are calculated by addition method. This product is applicable for the preparation of the gear oils of SAE90, 80W/90, 85W/90, 85W/140 blended with Group I and Group II gear oils. The qualities of GL-4 and GL-5 respectively comply with the requirements of the standards Q/SH011-066-96 and GB13854. The qualities of the blended CKC and CKD comply with GB 5903 standard.
  
  
  Characteristics
  
  
  Item Typical value Test method
  Density, kg/m3, at 20oC Report ASTM D1298
  Flash point (COC),oC 100 ASTM D92
  Kinematic viscosity, mm2/s, at 100oC 6 ASTM D445
  Phosphorus, mass% 0.9 ASTM D1091
  Sulfur, mass% 30 ASTM D129
  Nitrogen, mass% 0.3 GB/T3228
  Mechanical impurities, mass% 0.1 GB/T511
  
  
  Packing,Transportation and Storage
  1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
  2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
  3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/T0164.
  
  Points for Attention
  1, The package is a kind of functional additive package, applied by adding with antifoam agent.
  2, The recommended temperature for blending of oil is 60-65oC.
  3, The temperature of heating steam for transferring and blending should be 65-70oC.
  

• Company:

  Jinzhou DPF TH Chemicals Co Ltd     [ China ]        

• Contact:

  Elaine

• Tel:

  0416-5160636

• Fax:

  0416-5160600

• Email:

  thesales@tianhechem.com