Parker Domnick Hunter Filter Cartridges

• Post Date:

  May 05,2014

• Expiry Date:

  Nov 01,2014

• Detailed Description:

  n
  Integrity tested prior to despatch
  n Comprehensive range of end cap configurations for
  retrofitting
  n Validated to ASTM F838-83 methodology
  n Superior chemical resistance of PTFE membrane
  combined with polypropylene hardware
  n Available in sterilising, microbial and particulate
  grades
  TETPOR LIQUID filters are particularly suitable for sterilisation and particulate
  removal from aggressive chemicals (including acids, bases and solvents)
  within a wide range of critical processing industries.
  The superior performance, strength and durability of TETPOR LIQUID filters
  results from the use of a single layer, high security PTFE membrane. TETPOR
  LIQUID membrane has a high dirt holding capacity due to its high voids
  volume. This results in low pressure drops and long service life. High flow
  rates are achieved due to the optimised pleat pack density and the superior
  design construction of TETPOR LIQUID filters. TETPOR LIQUID filters may be
  repeatedly steam sterilised or autoclaved up to 135°C, providing the user with
  assured security of performance.
  Technical Specifications
  Materials of Construction
  Filtration Membrane : PTFE
  Upstream Support : Polypropylene
  Downstream Support : Polypropylene
  Inner Support Core : Polypropylene
  Outer Protection Cage : Polypropylene
  End Caps : Polypropylene
  Endcap Insert : 316 Stainless Steel
  Standard o-rings/gaskets : Viton
  Capsule Body : Polypropylene
  Capsule Vent Seals : Silicone
  Filling Bell : Polycarbonate
  Syringe Filter Body : Polypropylene
  Food and Biological Safety
  Materials conform to the relevant requirements of 21CFR
  Part 177 and current USP Plastics Class VI - 121°C and
  ISO10993 equivalents.
  Effective Filtration Area
  Up to 0.75m2 (8.1 ft2) per 250 mm (10¨ module).
  Retention Characteristics
  TETPOR LIQUID Sterilising Grade filters are validated by
  bacterial challenge testing to methods specified in ASTM
  F838-83 (107 organisms/cm2 minimum) with typical
  in-house challenge levels being 1011 per 10 inch module.
  Recommended Operating Conditions
  Up to 70°C (158°F) continuous operating temperature and
  higher short-term temperatures during CIP to the
  following limits:
  
  539992097 ZCHP1-1.0C-S
  539992104 ZCHP2-1.0C-S
  539503800 ZCMT1-020-C-A
  539550487 ZCMTA-020Z-AS
  539509855 ZHFT/1C
  539509858 ZHFT/2C
  539509861 ZHFT/3C
  539509852 ZHFT/AZ
  539509850 ZHFT/BZ
  539509854 ZHFT/KC
  509520100 ZCHB-1C
  509520101 ZCHB-2C
  509520102 ZCHB-3C
  509520107 ZCHB-AZ
  509520105 ZCHB-BZ
  509520099 ZCHB-KC
  539992629 ZCPP1-.60C-P
  539995834 ZCPP1-.60N-PP
  539993117 ZCPP2-.60C-PP
  539994972 ZCPP2-040C-PS
  539993588 ZCPP2-1.0C-P
  539993146 ZCPP3-.60C-P
  539580323 ZCPP3-003C
  539992866 ZCPPB-1.0Z-P
  539551913 ZCGF1-005C-SP
  539570156 ZCGF2-010B
  539630286 ZCGF3-1.0C-S
  539570661 ZCGFA-1.0Z
  539570671 ZCGFB-1.0Z
  539630299 ZCGFK-1.0C-S
  539993258 ZCMT1-020C-PP
  539993115 ZCMT2/020C-PP
  539994590 ZCMT3-020C-PP
  539550924 ZCMTK-020C-LP
  539550487 ZCMTA-020Z-AS
  539565064 ZCMS1-010C-P
  539565065 ZCMS1-020C-P
  539565066 ZCMS1-045C-P
  539565072 ZCMS2-010C-P
  539565073 ZCMS2-020C-P
  539565081 ZCMS3-020C-P
  539567000 ZCMSK-020C-P
  539501260 ZCMA2-020C-P
  539501270 ZCMA3-020C-P
  539500725 ZCMA3-300C-/E
  509590166 ZCSS1-001C
  509590169 ZCSS2-001C
  509590172 ZCSS3-001C
  509590163 ZCSSA-001T
  509590160 ZCSSB-001T
  509590176 ZCSSK-001C
  ZCCFA-003C
  ZCCFB-003C
  ZCCF1-003C
  ZCCF2-003C

• Company:

  Shenzhen Sayes Advanced Filtration Co.,Ltd     [ China ]        

• Contact:

  John Zhang

• Tel:

  +86-598-6829199

• Fax:

• Email:

  Sayes999@gmail.com