RTV-2 liquid manual molding silicone rubber

• Post Date:

  May 10,2013

• Expiry Date:

  Nov 06,2013

• Detailed Description:

  Cas No. :39100000 Quantity: 200Kilograms
  Specs:620
  Price:9 USD Kilograms
  Payment Method: L/C,T/T
  RTV-2 liquid manual molding silicone rubber
  
  Brief description of RTV-2 liquid manual molding silicone rubber
  RTV-2 liquid manual molding silicone rubber is a flowable liquid, and the quality has nothing to do with the color. It consists of two components. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-3 hours.
  Note: The time for vacuum-pumping should be less than 3-5 mins ,otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.
  
  Applications of RTV-2 liquid manual molding silicone rubber
  RTV-2 liquid manual molding silicone rubber is mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, electronics, handicrafts, large-scale sculpture, reproduction of cultural relic, sole molds, pad printing allocation, Electronic equipment antivibration, etc.
  
  Brief features:
  1.Good elasticity
  2. Non deformation
  3. Heat resistance
  4. Low shrinkage.
  
  Operation Instruction:
  1)Correct mixing ratio
  2)Preparation of the Original molds
  3) Vacuum-Pumping Process
  
  Frequently asked questions of RTV-2 liquid manual molding silicon Rubber
  1. How to deal with the bubbles during the mixing process?
  It depends on your practical situation. Firstly you can deal the mixture with a vacuum machine if you have one; If no such machine, you can reduce the mixing ratio of the hardener from 4% to 1%-2%.Then in the prior period of the reaction of the mixture will be slower, then the air in the mixture will exhaust by itself for a longer curing time to release the bubble.
  
  Any more questions please feel free to contact Aimee:
  EMail:hysz(at)szrl(dot)net
  Mob:86-18938867541

• CAS Registry Number:

  39100000

• Company:

  Shenzhen Hong Ye Jie Technology Co., Ltd     [ China ]        

• Contact:

  aimee

• Tel:

  8675589948019

• Fax:

  8675589948030

• Email:

  hysz@szrl.net