Soft feel silicone coatings on silicone rubber

• Post Date:

  Jul 28,2014

• Expiry Date:

  Jan 24,2015

• Detailed Description:

  Quantity: 10000Metric Tons
  Specs:Silicone soft feel paints ,smooth touch coats
  Price: USD Kilograms
  Payment Method: T/T ,Western union
  Products Information
  
  Silicone Rubber Electric Conductive Coating
  PD-0403-4
  PD-0403-4 is two components compound electronic conductive spraying coating. Characterized
  by stable resistance value, strong adhesion, wear-resisting, glossy surface, tearing resistance and
  other advantages.
  Mainly applied to silicone rubber Connector, intermediate, lightning arrester and other silicone
  rubber electric cable accessories.
  Electronic Resistivity Rth:1KΩ ~3KΩ. (Space between measuring point＝10mm)
  Application Method:
  Process
  Condition
  Spraying viscosity
  (Iwata 2# cup,
  25 ℃ ) (S)
  Spraying
  distance
  (cm)
  Spraying
  caliber
  mm
  Spraying
  pressure
  Mpa
  Force Drying
  (180-220℃)
  Min
  Coating 9-10 20-25 1.0/1.5 0.2-0.3 5-10 (dry to touch)
  30-40 (hard dry)
  1. Application Ratio：A: B=100 : 1 (A is coating ink, B is catalyst)
  2. Pleases do stir evenly and filter with 200~300-hole mesh 200～300. Curing the ink after
  spraying 30 minutes later.
  3. The activity life of mixed ink is 8 hours.
  4. Keeping constant temperature at 22℃and constant humidity when using conductive coating.
  5. Please do make backflow of spraying gun every 15 minutes or mixing during continuous
  operation for keeping the uniformity of coating and avoiding nonuniformity of electrical
  resistance.
  6. As the electric cable accessories relate to various shapes, if conditions allow, take the way of
  hoisting automatic spraying or twice spraying would be better for resistance value when
  coating on the silicone rubber electric cable accessories.
  Note: Before first baking spraying 1-2 times or spraying over 8 areas, then spraying over 8
  areas and curing again..
  7. All the above data only for reference.
  Shenzhen anglibang Science and Technology Co., Ltd.
  Products Information
  Add:H Building,XinWei 3rd industrial area,DaLang Street, LongHua Town,Baoan District , Shenzhen City, Guagdong
  
  Curing Condition:
  A.Vertical oven:Baking at 180℃ for 30minutes.
  B.Horizontal oven:Baking at 220℃ for 20 minutes.
  Attentions：
  1. This agent including volatile solvent, please keep ventilating and far away from heat and open
  flame.
  2. Avoid skin contact for a long time and vapor inhalation, if happens,washing with soap once
  skin contact.
  3. The operating environment is important for coating process, please work in dust-free plant at
  constant temperature 15～45℃ and constant humidity at 15～80%.
  4. During the operating process, more dust pollution and more NG products, as the changing of
  temperature and humidity, bad property of flowability and adhesion strength will be appeared by
  low temperature, and the higher humidity will cause coating shrinkage cavity, the lower humidity
  will cause potential safety hazard and whity by static.
  Storage: Stored at room temperature for 6 months without mixing.This products has sediments
  belong to the normal situation. Please shake well before using.
  Packing: 1KG/Bottle

• Company:

  Shenzhen Kanglibang Science Technology Co.,Ltd     [ China ]        

• Contact:

  michael

• Tel:

  +86-0755-81478018

• Fax:

  +86-0755-81478372

• Email:

  klbsales009@163.com