industry cooling system special low temperature anticorrosion coating

  SWD959 Series SH128 One component moisture

    cure polyurethane (rigid) system industry low

       temperature cooling system anticorrosion coating

Descriptions                 The cooling system of the equipment of the industry works in super-low temperatures for a long time. Traditional anticorrosion coating products are hard to achieve the ideal protective effect since it’s easy to crack and peel up under this environment. Once the corrosion is excessive, the maintenance will be very different and cause great damage for the normal production. The low temperature anticorrosion special coating developed by SWD Urethane Co., USA overcomes the disadvantages that no able to keep the high anticorrosion and low temperatures flexibility properties together of traditional common coating. It will provide effective protection for the equipment and expand its life.

Characteristics              One component polyurea polyurethane resin in the coating not only cured by absorption and reaction with air moisture, but also can combine with substrate hydroxyl group, then greatly increases the coating's adhesive strength on surface of substrate to ensure that it won’t fall off until the low temperatures of -60 ℃. The urea bond, urethane bond and hydrogen bond between high molecules chain structure give the film of coating excellent performances of acid resistance, alkali resistance, salt resistance, oil resistance, ammonia resistance, water resistance, chemical media resistance and the super flexibility and low temperature resistance.

Specifications

Adhesive strength                            11.5Mpa

Impact resistance                             ≥50kg•cm

Tensile strength                              17Mpa

Elongation                                   350%

Temperature variation                         -60℃

Wear resistance（700g/500r）                  10.5mg

Acid resistance 40%H₂SO₄ or 20%HCI, 30d         no rust no bubbles no peel

Alkali resistance 50%NaOH, 30d                 no rust no bubbles no peel

Salt resistance 100g/L, 30d                       no rust no bubbles no peel

Salt spray resistance 1000h                      no rust no bubbles no peel

Oil resistance 0# diesel Crude oil 30d              no rust no bubbles no peel

                                                                                Data of performance

Color                        Multiple colors as customers’ need

Luster                        half glazed

Density                       1.03g/cm³

Volume solid content            78%±2%

VOC                           ≤176g/L

Recommended dry film thickness   150-250μm(system)

Theoretical coverage             0.19kg/sqm (calculated by the above solids percentage and dry film thickness of 150 microns)

Practical coverage                Allow appropriate loss factors

Dry time                       1-3h

Overcoating interval              min: 3h, max: 26h

Overcoating method              Airless spray, Air spray, Brush, Roller

Flash point                      52℃

Recommend procedures

          Note: painting 2 or 3 times is allowed

Application scopes         Industry cooling system equipment anticorrosion.

Shelf life                 12 months (Indoor with dry and cool conditions)

Packing                    20kg/bucket. 25kg/bucket

Production area             Minhang District, City of Shanghai（19% of raw materials imported from SWD US）

Security                   To apply this product must be accordance with the relevant national regulation of sanitation, safety and environment. Avoid contacting the wet coating.

Global applicability         Our company aims to provide worldwide customers the same coatings, but sometimes, some small adjustments are made to satisfy each region conditions and international norms, in this case, an alternative product data will be provided.

 Integrity declaration         Our company guarantees the reality of the listed data, due to the diversity and variability of the application environment, please test and verify it before use. We don’t take any other responsibilities except the coating quality self and reserve the right of modification the listed data without prior notice.