Paint and Coatings

 SWD952 Series SH120 One component moisture

    cure polyurethane (elastic) system industry plant

  steel structure anticorrosion protective coating

Descriptions               Industry plant shop steel structure mainly influenced by the atmospheric corrosive environment, SO2, H2S, HCl, Cl2, NH3, NaCl and other atmosphere substances all have very large anticorrosion damages. In addition, the floating material in air, such as sand, charcoal and other particulate matter will also scour wear steel structure. Based on the above reason SWD Urethane Co., USA developed industry steel structure anticorrosion protective coating, this product will rise the anticorrosion maintenance cycle of industry plant steel structure to above 10 years.

Characteristics              The Coating has high performances of acid resistance, alkali resistance, ammonia resistance and salt spray resistance. Surface of film is dense, flexible, with high performances of wear resistance, impact resistance and anti-aging. No crack, no peel off, no fall down, the coating can bear alternating impact of hot and cold in various natural environment and erosion scour of the chemical atmospheric ambition. One component product, just open it for use, avoided the cumbersome on-site equipment of two components coating and the quality problems raised from improper proportion preparation. Coating has good construction performance it can be painted on the hand brushable anticorrosion metal surface and cured under condition of low temperature and high humidity.

                                                                                Specifications

Adhesive strength                               9.1 Mpa

Impact resistance                                ≥50kg·cm

Tensile strength                                  16Mpa

Elongation                                      350%

Temperature variation                             -40------+180℃

Wear resistance  （700g/500r）                     9mg

Acid resistance (40%H₂SO₄ or 15%HCI, 30d)           no rust no bubbles no peel

Alkali resistance 30%NaOH, 30d                     no rust no bubbles no peel

Salt resistance 100g/L, 30d                           no rust no bubbles no peel

Salt spray resistance 3000h                          no rust no bubbles no peel

Oil resistance 0# diesel crude oil 30d                  no rust no bubbles no peel

Data of performance

Color                        Multiple colors as customers’ need

Luster                        half glazed

Density                       1.06g/cm

Volume solid content            79%±2%

VOC                         ≤186g/L

Recommended dry film thickness   150-200μm

Theoretical coverage             0.21kg/sqm (calculated by the above solids percentage and dry film thickness of 150 microns)

Practical coverage                Allow appropriate loss rate

Dry time                       1-3h

Overcoating interval              min: 3h, max: 24h

Overcoating method              Airless spray, Air spray, Brush, Roller

Flash point                      53℃

Recommend procedures

Application scopes          Industry plant, production equipment and other kinds of steel structure anticorrosion.

Shelf life                 10 months (Indoor with dry and cool conditions)

Packing                    20kg/bucket. 25kg/bucket

Production area             Minhang district, City of Shanghai（17% of raw materials imported  from SWD US）

Security                   To apply this product must be accordance with the relevant national regulation of sanitation, safety and environment. Avoid contacting the wet coating.

Global applicability         Our company aims to provide worldwide customers the same coatings, but sometimes, some small adjustments are made to satisfy each region conditions and international norms, in this case, an alternative product data will be provided

Integrity declaration         Our company guarantees the reality of the listed data, due to the diversity and variability of the application environment, please test and verify it before use. We don’t take any other responsibilities except the coating quality self and reserve the right of modification the listed data without prior notice.