Paint and Coatings

  SWD961 Series SH137 room temperature cure water base resin system epoxy iron oxide red industry anticorrosion protective primer

Descriptions                 In order to decrease the air pollution, countries published many laws and regulations of restricting the VOC content of the solvent coating and encouraged to use the water base coating. Based on this marketing demand, SWD Urethane Co., USA took the social responsibility of environment protection, finished many scientific researches and developed the water base iron oxide red anticorrosion protective primer in the late 20^th century. This primer has been widely used in the industrial anticorrosion coating. It is green and environmentally friendly without damage to the environment and human’s health, no security risks.

Characteristics              Through special precision formulation and scientific process, this coating takes the environment friendly water base high molecule polymer resin and high quality iron oxide red as main material. Coatings is dense, with high impact resistance, plugging performance and penetrate resistance, excellent properties of rust resistance, anticorrosion, water resistance, wet resistance, oil resistance. With high adhesive strength on metal substrate, bond well with the following coating, it is one component water base product, easy to perform, without damage to people’s health and pollution to the environment ambient.

Specifications

Adhesive strength (grid method)                 Class 1

Impact resistance                             ≥50kg•cm

Temperature variation                         -40------+150℃

Wear resistance（700g/500r）                  14mg

Acid resistance 30%H₂SO₄ or 10%HCI, 30d        no rust no bubbles no peel

Alkali resistance 30%NaOH, 30d                 no rust no bubbles no peel

Salt resistance 60g/L, 30d                       no rust no bubbles no peel

Salt spray resistance 1000h                      no rust no bubbles no peel

Oil resistance 0# diesel Crude oil 30d              no rust no bubbles no peel

Data of performance

Color                        Multiple colors as customers’ need

Luster                        glazed

Density                       1.25g/cm³

Volume solid content            61%±2%

VOC                         ≤83g/L

Recommended dry film thickness   30-80μm

Theoretical coverage             0.12 kg/sqm (calculated by the above solids percentage and dry film thickness of 50 microns)

Practical coverage                Allow appropriate loss rate

Dry time                       1-3h

Overcoating interval              min: 3h, max: 28h

Overcoating method              Airless spray, Air spray, Brush, Roller

Flash point                      Non flammable non explosive, safety and environmental protection

Recommend procedures                         

Application scopes      Metal structures of petroleum, chemical, construction, transportation, electricity, steel, coal, municipal protection and other areas

Shelf life              12 months (Indoor with dry and cool conditions, frozen below 0℃)

Packing                    20kg/bucket, 25kg/bucket

Production area              Minhang District, City of Shanghai（26% of raw materials imported from SWD US）

Security                   To apply this product must be accordance with the relevant national regulation of sanitation, safety and environment. Avoid contacting the wet coating.

Global applicability        Our company aims to provide worldwide customers the same coatings, but sometimes, some small adjustments are made to satisfy each region conditions and international norms, in this case, an alternative product data will be provided.

Integrity declaration         Our company guarantees the reality of the listed data, due to the diversity and variability of the application environment, please test and verify it before use. We don’t take any other responsibilities except the coating quality self and reserve the right of modification the listed data without prior notice.